资源列表
DrvDS1629
- 此驱动程序主要是针对AD7799（24位高精度AD转换器）的，开发环境是IAR-This driver for AD7799 (24-bit high precision AD converter) development environment IAR
SD16-CODES
- msp430f2xx3 SD16初始化及驱动代码-msp430f2xx3 SD16 initialization and driver code
WR25pXX
- flash 芯片25P系列相关读写程序源码，经过测试OK的。-Write/Read 25p10/25P20 source code.
Step-Motor-MSP430
- 用msp430G2553 控制两相四线的步进电机（通过L298n），带正反转控制，可控制前进距离和顺/逆时针转动角度。-control the step motor with msp430G2553,including CW/CCW, whoes angle is adjustable.
ADC_timperature
- MSP430片内自带温度传感器的测量程序-temperature of MSP430
6
- 程序功能为等待8255复位完成后，对8255进行初始化设置，设置8255的三个可编程并口全部为输出方式，用于同时显示0~9的10个数字，显示格式为：‘000、111、222、333、444、555、666、777、888、999’。显示数据更新时间间隔为05s-Program features reset wait for 8255, 8255 initialization settings, set 8255 all three programmable parallel port outpu
6803writecfgr
- 读写LTC6803配置寄存器 使用Codewarrior PE生成的SPI 驱动-LTC6803 to read and write configuration registers using CodeWarrior PE generated SPI driver
readtemp
- 启动LTC6803-1温度ADC转换和轮询并读取LTC6803-1温度寄存器-Start the LTC6803-1 the temperature ADC conversion and polling LTC6803-1 and read the temperature register
readvol
- 启动LTC6803-1电池电压ADC转换和轮询并读取LTC6803-1电池电压寄存器-Start the LTC6803-1 LTC6803-1 battery voltage ADC conversion and polling and read battery voltage register
Readflag
- 启动LTC6803-1 电压ADC转换和轮询并读取LTC6803-1电池标志寄存器-Start the LTC6803-1 the voltage ADC conversion and polling and read the LTC6803-1 battery flag register
counter
- 通过红外对射传感器计数，然后LCD显示滴速，课用于自动计数，该程序用于医院点滴滴速测量-Infrared beam sensor count, then the LCD display the drip rate class for automatic counting, the program for hospital drip drip rate measurement
dianzishiduji
- 此代码为电子湿度计的代码，经过实际验证切实可行。-This code for electronic hygrometer, through practical verification is feasible.