资源列表
Viterbi
- （2,1,3）卷积码的Viterbi译码C程序，已经验证成功
nrf905
- 主芯片c8051f020,无线发射模块采用nrf905（通信口为spi)，可自己建立通信协议，非常好用。-The main chip c8051f020, the wireless transmitter module uses nrf905 (communication port to spi), can establish its own communication protocol, very easy to use.
LCD1602_51
- 用51单片机驱动LCD1602，包括显示字符或字符串-With 51 Microprocessor LCD1602, including the display character or string
main
- fft快速傅里叶变换，通过液晶显示输出结果 频谱输出各频段的幅值。-fft Fast Fourier Transform, the output spectrum through the LCD display output amplitude of each frequency band.
display
- 利用单片机（51系列）控制超声波模块，实现测距的动能，有盲区，但是通过调整程序可以提高精度。经过本人调试，程序可用并可实现测距功能-Microchip (51) control ultrasonic module, the kinetic energy ranging, there are blind spots, but the accuracy can be improved through the adjustment process. After I debug, the program
F34x_Blinky
- This program flashes the P2.2 green LED on the C8051F34x target board
ks0108_12864
- KS0108 液晶屏的驱动程式 很全面 很好用-KS0108 LCD driver very well with very comprehensive
2
- 延迟0.5s 晶振6MHZ 输出LED ，芯片AT89C51-Delay 0.5s crystal 6MHZ output LED, chip AT89C51
4X4key_-and_12864
- 4x4键盘通过按键，在12864液晶显示屏上显示各种汉子，字符，和数字。-failed to translate
duojichengxu
- 程序功能：接收PWM控制信号，将其转换成对应的控制目标角度，A/D采样回馈得到当前摇臂的角度，最后在程序中采用PID控制输出，是摇臂到达预定目标。-Program features: PWM control signal received, which was converted to the corresponding control target angle, A/D sampling to obtain the current angle of the swing arm back. Fi
zhishideng
- 自动发卡器，可以自动区分好的ID卡和坏的ID卡并且按顺序排列，加油指示灯，正常运行绿灯，报警红灯亮。-Automatic card dispenser can automatically distinguish between good and bad ID cards and ID cards are arranged in order, fuel indicator, the normal operation of green, red light alarm.
stc_io_uart
- STC15Fxx 系列 软件模拟串口举例-Simulation of STC15Fxx series software serial port example