资源列表
CommOperateGps.h
- eVC下操作串口提取GPS有效数据1，把文件名字后缀.rar去掉即可，不用解压缩。-operate under serial data from a GPS effective, the document name suffix. Rar can be removed without decompression.
9297-03
- 单片机程序，接收电话机数据并发送，涉及DTMF信号通讯。-SCM procedures to receive and send data exchanges involving DTMF signal communications.
infraredrays
- 红外遥控接收发送源程序 Interrupt for IR subroutine external interrupt source INT0-infrared remote control receiver Interrupt this source for IR subroutine e xternal interrupt source INT0
MY63101
- usb通讯,本代码主要是练习CY63101芯片的初始设置和通讯。
mega16_PWM.rar
- [AVR源代码]快速PWM模式产生正弦波,[AVR source code] Express sinusoidal PWM model
gps
- LINUX下gps接收机接收程序,已经编译成功，十分好用，好用好用。-LINUX gps receivers under the program, has compiled successfully, very easy to use, easy to use.
fs9031-e
- 用于电瓶车的遥控报警系统的完整原程序，是现在正在生产的成熟代码。-Battery for the remote control car alarm system complete the original program, is now a mature production code.
ISD_4004
- 89C51单片机控制语音芯片4004例程-89C51 single-chip voice chip control routines 4004
2
- 范围为0-9999的双向定时器，当我们要求系统为正定时器时，初始时间为00，即从00开始向上加计时，当加计时到设定值，正定时器停止工作，系统输出相应的控制信号，控制其他设备，当要求作为倒定时器使用时，初始时间为9999，即从9999开始向下减计时，当减到计时设定值时，倒定时器停止工作，系统输出相应的控制信号。-Two-way range of 0-9999 timer, when we ask the system timer is, the initial 00 hours, that is,
GSMMODEMsendmessage
- 通过串口GSM MODEM发送短 2.5小时发1000条 自己写的小脚本-GSM MODEM through the serial port to send a short 2.5 hours made 1000 a small scr ipt ，writen by myself
Counter
- 程序说明:本程序是将串口接收到的数据中的A的个数进行计算，显示结果 硬件连接:使用实验箱BACK 3部分电路。-Program Descr iption: This program is the serial received data to calculate the number of A, showing the results of hardware connection: using part of the circuit experiment box BACK 3.
ADS7816a602a51
- ads7816驱动lcd1602进行串口显示采样数据-ads7816 driver for serial display sample data lcd1602