资源列表
yaokong-NEC
- NEC遥控编码格式的遥控器的解码程序,比较好用,实验通过-NEC remote encoding format for the remote decoding procedures, more convenient, through experiments
nx25p40.c
- 大容量flash存储芯片nx25p40/80/16/32的单片机驱动程序,容量可以达到512K字节,1M字节,2M字节,4M字节。时钟速度可达50M。-large-capacity flash memory chips nx25p40/80/16/32 SCM Driver , the capacity could reach 512 K bytes, 1M byte, 2M byte, 4M bytes. Clock speeds of up to 50 M.
ads1255
- 24位SPI方式工作的ADS1255摸数转换器的的驱动程序,
HT1621_Driver
- 使用HT1621驱动LCD,显示设备的工作状态。主要包括1621的初始化和数据写入LCD。
5154528745
- 抢答器单片机设计 抢答器单片机设计
12232
- 单色LCD显示的示例程序,可以驱动LCD显示
15883866ads1255
- ads1256的源码程序!!!24ad转换
kechengsheji
- 1) 定时开2小时,关20分钟; 2) 环境温度高于28℃,报警并切断电源; 3 电源电压超过AC250V时,报警并切断电源报警并切断电源。 实现对功能键的选择识别和工作状态的跳转。 主要参考元件:DS18B20 LM339 -1) from time to time to open two hours off for 20 minutes 2) higher than the ambient temperature 28 ℃, the police and cut off
shizhong
- 可调时间的时钟程序~调时时相应位闪烁,硬件使用的是数码管~单片机内部定时,有时间矫正~-Adjustable time clock program ~ tune from time to time corresponding bit flash, hardware using digital tube ~ MCU internal timer, time-correction ~
MCU-ZKB
- 占空比的测量,利用了片内定时器准确测量占空比参数。-Duty cycle measurement, use of accurate measurement of the duty cycle timer chip parameters.
jiema
- 用于红外解码,解码接收的遥控器红外信号,在单片机上用数码管显示接收的显示。-For IR decoding, decoding the received remote control infrared signal, the microcontroller on the receiver with a digital display of the display.
1602
- 实现1602的基本功能,主要实现显示欢迎字符的功能-1602 achieve the basic functions, the main character display welcome
