资源列表
MiniGUI
- 此程序为 minigui-free在arm9200上成功移植的配置文件，非常值得参考，欢迎下载！-this procedure to MiniGUI-free in arm9200 successful transplantation of configuration files, valuable reference, welcome to download!
5054
- x5054读写程序。用80S51控制。C语言，有助于了解存储器的读写-x5054 read and write procedures. With 80S51 control. C language, helps the reader to understand memory
shiboqi
- 这是一个我上大学时候在arm上做的示波器的程序，不是很完善，但能跑成功
v_pid
- PIC16X187实现的PID算法，采用c语言实现，已应用到BLDC（直流无刷电机控制的实现）
traffic_light
- 推荐题目要求：1.主、支路无车时主干路“绿”； 2.若主、支路均有车时，主干路绿45S,支路绿25S,绿灯结束时黄灯亮5S； 3.主、支路传感器信号用按键传递，高电平表示有车。-Recommended subject requirements: 1. Lord, slip-free car trunk road green 2. If the Lord, slip both cars, Green Trunk Road 45S, slip Green
dcc
- 调试通道例子。DCC is available on ARM cores which contain EmbeddedICE logic, e.g. ARM7TDMI, ARM9TDMI, etc. DCC is accessed by the target via coprocessor 14 using the ARM instructions MCR and MRC. The two assembler source files provided are: out
ri.tar
- S3C2440上实现红外信号的接收的驱动程序。利用一个I/O口，不占用串口。已经在板子上实验通过了。-s3c2440 driver
display
- ATMEGA8连接74HC164，使用M8的模拟口对164进行操作，程序源码。可以直接使用-ATMEGA8 connection 74HC164, using the M8 analog port on the 164 to operate, the program source code. Can be used directly
beta2
- 红外控制LED 单片机简易程序 功能实现：LED上点的移动，描点画图-Infrared LED MCU control functions to achieve summary: LED on the point of moving, drawing scanning point
remote_code_test
- 遥控接收程序，可实现仪器设备的遥控，51系列单片机。-remote program
xlirlcd
- 红外控制1603液晶的程序，挺实用的对于红外控制来说-Infrared control 1603 LCD program, a practical for infrared control of it
lbg
- LBG递推算法。用于解现代信号处理线性预测方程。c语言编写-LBG recursive algorithm. For the solution of linear prediction equations of modern signal processing