资源列表
AT89C51yjcx
- AT89C51与字符型液晶模块16x2联接的C语言源程-AT89C51 with 16x2 character LCD module connected to the C-language source
只用一个管脚的C51解码NEC红外遥控码程序
- 独具一格，只用一个I/O资源就可测出常用的NEC格式IR 遥控码-a unique and use only one I / O resources can be used to measure the NEC format IR remote control code
7279
- 7279按键程序,简单易懂
servo1
- 舵机调试程序舵机控制信号管脚,为P0.7管脚 系统时钟为24500KHZ/8=3062.5KHZ周期为20ms，则频率为50HZ，则tmph+tmpl=61250可以保证产生50HZ PWM
EPOLL_bring_us
- epoll bring us many things,so we can study in this doc.-epoll bring us many things, so we can study in this doc.
iap_flash
- SST89V516RD 内部flash读写程序-sst89v516rd2 internal flash operating functions
MSP430f149-LCD12864
- MSP430f149控制LCD12864显示汉字、字母-MSP430f149 control LCD12864 display Chinese characters, letters
ad7705
- 默数转换芯片ad7705应用源码，atmega16-Tacit digital converter chip ad7705 application source code, atmega16
gpio_step_motar.c
- OK6410 开发板，嵌入式IO接口驱动以及测试程序，能够用GPC端口进行控制4相步进电机，很实用的代码-OK6410 development board, embedded IO interface drivers and testing procedures, can be controlled four-phase stepper motor, very useful code by GPC port
hongwaijiema
- 实现红外遥控单片机，单片机解码，显示遥控器上的数值，主要实现一个红外解码的功能-Infrared remote control MCU, microcontroller decoding, display the value on the remote control, the main achievement of an infrared decoding function
outio
- MINI2440开发板电机CON4 GPIO引脚驱动程序,四个引脚分别为9、10、11、12。 c程序加编译好的ko驱动模块-MINI2440 CON4 GPIO pin development board motor driver, four pins 9,10,11,12 respectively. c program plus driver module compiled ko
LCD
- PIC16F887单片机的LCD显示程序-PIC16F887 LCD