资源列表
ADC
- 基于AVR及icl7135的温度测量板，其中7135采用icp方式，AVR用SPI总线隔离通信。已经量产过，请放心使用。-a temperature sense circuit using the AVR and ICL7135
s3c2410_CN
- S3C2410经过整理的全中文用户使用手册-S3C2410 After finishing the entire Chinese user manual
main
- AVR通过ICL7135的busy引脚采集的源程序。AVR的pwm提供ICL7135的时钟，并通过捕捉busy的宽度获得转换结果。编译环境是GCC-AVR-the source code of AVR-Mega48，the clock of ICL7135 is generated by M48，and its busy signal is used for the result of conversion by capture is width。
cpld_ccd
- 实现基于CPLD的CCD采集系统设计的VHDL源码，编译通过，-Implementation of the CCD acquisition system based on CPLD design of VHDL source code, compiles,
LCD_KEY
- mega32 控制 t6963，含菜单操作的gcc-avr源码。-mega32 control the lcd，T6963
nrf2401
- NAF2401的发送与接收程序，已通过测试，有键盘操作，键盘按的数据对应发出去-NAF2401 the sending and receiving process, has been tested to operate a keyboard, the keyboard according to the data sent to the corresponding
(ebook-pdf)DSP-RealTimeDigitalSignalProcessing(Usa
- 实时数字信号处理，以TMS320C5510这款DSP为例，通过大量实例引导读者认识和使用这款器件．-Real-time digital signal processing, in order to TMS320C5510 this DSP, for example, by a large number of examples to guide readers to understand and use the new device.
CORDIC_SINE
- 在ISE10.0下的CORDIC算法产生正弦波，可控制其幅度等参数-Under the CORDIC algorithm in the ISE10.0 produce sine wave, its amplitude and other parameters can be controlled
UART
- 基于lpc2103的uart的示例程序，可以通过本人验证，这是能用的哦-uarst
AVR_Bootloader_cn
- 具有通用性的 AVR Bootloader，不同型号的AVR单片机只需要修改一下几个简单的配置参数就可以直接使用了，不需要再修改主程序 -With the general nature of AVR Bootloader, different models of AVR microcontroller need only amend the wording of a few simple configuration parameters can be used directly, and d
LwIP
- 瑞士国家计算机学院开发，LwIP实现的重点是在保持TCP协议主要功能的基础上减少对RAM 的占用，一般它只需要几百字节的RAM和40K左右的ROM就可以运行，这使LwIP协议栈适合在低端的嵌入式系统中使用。 -The Swiss National Computer Science Development, LwIP to achieve focus is on maintaining the main functions of the TCP protocol to reduce RAM
CAN
- can总线的测试程序，包含完整的原理图和pcb板，程序测试通过．主控芯片at89s52，四位数码管显示，两位接收，两位发送．-can bus test program, including a complete schematic and pcb board, the program test. Master chip at89s52, 4 digital LED display, two receiving, two to send.