资源列表
DA
- 用altera 公司的cyclone2 作为内核控制da902作为数模转化器-Cyclone2 with altera' s control as a core as a digital-analog converter da902
ZIGBEE-Lcd
- 这个是ZIGBEE的LCD显示例程，是基于CC2530的，希望对大家有帮助。-This is ZIGBEE the LCD display routines, is based on the CC2530, and I hope to be helpful.
99s
- 基于51单片机开发板的一个小程序，99秒倒数计时，数码管显示-51 MCU development board based on a small program, 99 seconds countdown timer, digital display
ZIGBEE-POT
- 这个是ZIGBEE的单点通讯例程，是基于CC2530的，希望对大家有帮助。-This is a single point of communication ZIGBEE routine is based on the CC2530, and I hope to be helpful.
hongwaishoufa
- 基于51单片机开发板的一个小程序，关于红外收发的应用-51 MCU development board based on a small program on the application of infrared transceiver
jidianqi
- 基于51单片机开发板的一个小程序，关于继电器的控制-51 MCU development board based on a small program on the relay control
ZIGBEE-WatchDog
- 这个是ZIGBEE的窗口看门狗例程，是基于CC2530的，希望对大家有帮助。-This is the window ZIGBEE watchdog routine is based on the CC2530, and I hope to be helpful.
Text3
- 秒计数可用20次50ms的计数溢出来实现。50ms的计数可选用T0方式1，16位定时方式，定时器初始值应为 65536-50×1000×11.0592/12=19456=4C00H 考虑中断响应时间及重装定时器初始值的时间共计约4个机器周期，定时器初始值加4（即4C04）。 秒计数值通过P2口输出，用LED指示灯显示。 -20 seconds count can be achieved 50ms overflow count. Count of 50ms means 1,16
9.5
- 薛晓玲的书单片机接口模块应用与开发实例详解，语音芯片ISD1760及应用-Xue Xiaoling book microcontroller interface module instance Detailed application and development, and application of voice chip ISD1760
51Driver_max7219
- 51对max7219的驱动程序，具体51与7219的引脚连接在端口定义处有反映-Drivers 51 to max7219
Verilog-advanced-design
- verilog设计进阶，详细示例，覆盖面全，包括代码以及相应波形仿真。-Advanced verilog design, detailed examples, full coverage, including code and the corresponding waveform simulation.
sdram_mdl
- ram代码的编写和使用 -ram ram code development and use of the preparation and use of the code