资源列表
EXAMPLE4.10
- PIC16887A单片机用PWM产生频率为1KHz、占空比为40 的波形-PIC16887A microcontroller PWM generation with a frequency of 1KHz, 40 duty cycle waveform
EXAMPLE4.15
- PIC16887A单片机一个双机通信，2个单片机异步串行通信接口相连方式为：RX和TX交叉对接，左边的单片机U1，每按下按键S1就发送一个字节数，从0x20开始发送，每送一个数据，此数加1.发送的同时在D口上输出。右边单片机U2为接收状态，采用中断方式，如有接收中断，则进入中断，将接收到的数直接在D口上输出-PIC16887A a two-machine communications microcontroller, two asynchronous serial communication i
EXAMPLE4.16
- PIC16887A单片机单片机U1为主控发送,从动接收,U2为从动接收,产控发送的双机通信:开始时,由U1担任主控方,向从动方U2发送字符”hello!”,发送完毕并转为同步从动接收状态,如接收到的字符为”How are you?”则LED闪亮,通信结束.U2开始时被设置为同步从动接收状态,收到7个字符并确认接收的字符为”hello!”后,再转为主控发送方式,回送字符”How are you?”,进入LED闪亮状态,通信结束-U1 is the master SCM SCM PIC16887A
EXAMPLE4.17
- PIC16887A单片机主控发送接收,与从动接收发送的双机通信,和上例一样,不管接收还是发送U1始终为主控方,U2始终为从动方,过程和上例一样-PIC16887A master microcontroller sending and receiving, sending and receiving the double slave communication, and, like the example above, whether received or sent is always the
ad9850-parral
- dds集成芯片AD9850控制源代码，可控制产生所需要的频率信息-dds source code control integrated chip AD9850
EP2C8_PER_lcd1602
- EP2C8Q208，控制1602LCD的Verilog程序，针对不同的板子，引脚配置需要修改一下-EP2C8Q208, control 1602LCD the Verilog program, for different board, pin configuration need to modify the look
Digital-radio-430
- 使用MSP430和TEA5767,实现数字音量收音机功能-Digital volume radio, using the MSP430 and TEA5767
EP2C8_PER_pwm
- EP2C8Q208,产生PWM波的程序，verilog编写的，希望对大家有用-EP2C8Q208, PWM wave generation process, verilog written in the hope that useful
EP2C8_PER_uart_receive
- EP2C8Q208,串口接收程序，verilog编写的，希望对大家有用-EP2C8Q208, the receiver program, verilog written in the hope that useful
EP2C8_PER_uart_send
- EP2C8Q208,串口发送程序，verilog编写的，希望对大家有用-EP2C8Q208, serial transmission procedure, verilog written in the hope that useful
EP2C8_PER_VGA
- EP2C8Q208,控制VGA的程序，verilog编写的，希望对大家有用-EP2C8Q208, VGA control procedures, verilog written in the hope that useful
2_uart_driver
- 基于uCOS的LPC213X ARM芯片的片载模块驱动。-NXP LPC213X on chip module driver(UART) running with uCOS RTOS.