资源列表
keil_led
- keil是一款非常优秀的编程软件，这个工程是利用keil为mini2440开发的led程序，用以替代传统的ADS开发环境-keil is a very good programming software, this project is to use keil mini2440 development led program, as an alternative to the traditional ADS development environment
S-Boot
- 这是一个类uboot的启动代码，支持s3c2440，具有体积小、使用简便等特点。-This is a uboot startup code, support s3c2440, small size, easy to use.
aodv_802_15_44
- this a 50 node tcl scr ipt for which is compatible for any protocol.(OLSR,AODV,DSR)-this is a 50 node tcl scr ipt for which is compatible for any protocol.(OLSR,AODV,DSR)
Pulse-signal-process
- 可以实现一下四项指标的程序1．设计8路脉冲信号发生器，其脉宽和频率均可调。 2．其中6路信号的频率同步可调，频率范围在0.1HZ-1MHZ，步进值自行设置。 3．其中2路信号的频率相同，但有相位差，2路信号的相位差用按键可调，步进值自行设置。 4． LED显示器上自动显示信号的频率值。-Can achieve the four indicators of the program. Design 8-channel pulse signal generator, the pulse w
Traffic-lights-program
- 设计一个交通信号灯控制电路。要求： 1、主干道和支干道交替放行，主干道每次放行30秒，支干道每次放行20秒。 2、每次绿灯变红灯时，黄灯先亮5秒钟，此时原红灯不变。 3、用十进制数字（递增计数）显示放行和等待时间。-The design of a traffic signal control circuits. Requirements: 1, main roads and branch roads alternately release, the main road each re
9CAP
- TI DSP F2812上实现CAP捕捉实现-TI the DSP F2812 CAP capture on
ADSP-BF533
- 基于ADSP-BF533的一些源程序，一个是关于其内核运算的，一个是基于其循环寻址的，可以平移到BF537平台。-Source based on the ADSP-BF533, one on its core operations, one is based on circular addressing can be shifted to the BF537 platform.
10QEP
- ti dsp f2812上QEP功能实现测速-the ti dspf2812 on QEP function
3Timer0_Interrupt
- ti dsp f2812定时器0中断实现 -ti dsp f2812 Timer 0 interrupts
8SPWM
- dsp f2812 EV事件管理单元实现SPWM输出-dsp f2812 EV event management unit SPWM output
13SPI_LED
- dsp f2812 spi 通信功能实现-dsp f2812 spi function to achieve
11DS1302
- 利用数码管制作电子时钟，可在proteus下仿真-Use of digital control to produce the electronic clock, can be simulated in proteus