资源列表
MWC_E17_O
- 基于ATmeal SAMD20处理器的无刷飞控程序，MPU9250+NRF24C01+等芯片应用程序。-ATmeal SAMD20 processor-based brushless flight control procedures, MPU9250+NRF24C01+ other chip applications.
USBCOM
- 基于STM32F103T8芯片的USB转隔离串口的设计方案，带原理图，源程序。-USB-to-serial-based isolation designs STM32F103T8 chip with schematics, source code.
AGV_EN25T80
- 实现了DSP28335对EN25T80的各种操作，包括读、写、擦除等。-realizes all operations to EN25T80 by DSP28335,including reading、writing and erasing.
lpc177x_8x_uart
- NXP177x-UART驱动程序，项目实测通过-NXP177x-UART driver, measured by the project
lpc177x_8x_can
- NXP 177x CAN驱动例子，性能良好，可用于实际项目-NXP 177x CAN drive, good performance, it can be used in the actual project
Bootloader-master
- Pixhawk四轴飞行器控制板的Bootloader 功能很强大-Pixhawk axis aircraft control board Bootloader Very powerful
PWM_Servo
- ADI公司的最新芯片CM40X系列电机控制例程；包含CM403和CM408，适合初次接触此芯片的用户。-ADI s latest chip CM40X series motor control routine contains CM403 and CM408, for the initial contact with this chip users.
a_vhd_16550_uart
- Using the UART core is the similar to using the standard 16550 UART, expect that the FIFO’s are always enabled, and there is no sticky parity.
fpu_double
- The Verilog version of the code is in folder “fpu_double”, and the VHDL version is in folder “double_fpu”. There is a readme file in each folder, and a testbench file to simulate each core. These cores are designed to meet the IEEE 754 standard f
u-boot-2015.01
- U-BOOT最新版本源码， 可以支持多种型号的CPU-U-BOOT lastest code, it supports kinds of cpu
7289-128
- LED显示芯片ZLG7289的驱动代码，单片机是ATMEL128-The drive for ZLG7289 to display LED, the processor is ATMEL128
RTC
- STM32Cube RTC初始化部分替换，原固件库函数不能处理有电池后备的情况.-STM32 Cube RTC initialization part replacement, the original firmware library functions can not handle the case of battery back-up.