资源列表
MAX539
- 12位DA转换器MAX539的单片机驱动程序-the driver of MAX539
TouchPad
- 电容触摸屏GT811的驱动程序，基于STM32F103.-the driver of the touch pad contrler GT811
M25P64
- 基于STM32F103的M25P64的驱动程序-the driver of the M25P64 based on the STM32F103
CommMonitor-v6.1
- 串口监控软件，可以不占用串口资源，非常好的调试软件。-Serial port monitoring software, you can not take a bunch of resources, very good debugging software.
device-monitoring-studio.7.25
- 串口和TCP还有usb协议调试软件，可以分析设备管理器里面通讯协议，非常适合开发人员进行数据分析和处理。-There usb serial and TCP protocol debugging software, which can analyze the Device Manager communications protocol, is ideal for developers for data analysis and processing
1-GPIO_led
- 基于MDK4.7开发环境下STM32F10X LED灯闪烁源代码（寄存器版本，非固件库版本），请注意，cmsis采用非1.3版本。startup.s源码有修改。-MDK 4.7 development environment based on the following STM32F10X LED light flashes source code (register version, non-firmware library version), please note, cmsis non-1
3-GPIO_key
- STM32F10X 按键输入程序（寄存器版本），程序可以修改，是否实现连发或非连发功能，本代码默认实现连发功能。-STM32F10X key input program (register version), the program can be modified, whether realized or bursts of firing function, the code default implementation bursts function.
MPU6050-DMP
- 最近在学mpu6050 给大家分享下官方库 注意：roll pitch 角度变化正确 但是有点慢 而yaw有误差-最近在学mpu6050 给大家分享下官方库 注意：roll pitch 角度变化正确 但是有点慢 而yaw有误差
usart_interrupt
- 使用STM32F10X实现USART功能。采用中断模式，非查询模式。-Use STM32F10X implement UART functions. Interrupt mode, non-query mode.
CSV
- 这是我自己经常用的log数据操作的库，主要是保存成csv文件格式，方便用excel进行打开分析数据。我平时都用它log电池老化数据然后 进行分析和处理。-This is my own library log data often operate primarily saved as csv file format to facilitate analysis of data using excel for opening. I usually have to use it to log batt
SPI-flash
- 基于STM32F10X芯片的SPI FLASH 程序源码，当进行跨页编程，是不允许的。-Based STM32F10X chip SPI FLASH program source code, when cross-page program, is not allowed.
2-GPIO_beep
- 基于STM32F10X的蜂鸣器实验。开发环境:MDK4.7寄存器版本，非库版本。-Based STM32F10X buzzer experiments. Development Environment: MDK4.7 register version, non-library version.