资源列表
code_clk_nco
- 码时钟发生器，可灵活配置参数，根据比例得到自己所需的码时钟，可用于扩频通信-CODE CLK MODULE CDMA
STM32SPIAD8802
- STM32F103RCT6+SPI+USART+AD8802控制AD8802八路输出-STM32F103RCT6+SPI+USART+AD8802 for 8 LEDS
001
- STC11/10XX系列独立波特率发生试验-STC11/10XX series of independent Baud Rate Generator Test
Digital-dynamic-scanning
- 数码管动态扫描,数码管动态扫描 数码管动态扫描-Digital dynamic scanning, digital dynamic scanning digital dynamic scanning digital dynamic scanning
max485
- 自己写的RS485的通讯程序，调试通过的，可以作为初学者的入门程序。-Write your own RS485 communication program, through debugging, as a beginner entry procedures.
bootloader_Lite_v1.1
- stm32 bootloader单片机引导程序-stm32 bootloader
test
- 本档是基于STM32F103+ FreeRTOS的+ LWIP源，FreeRTOS操作系统可以运行，但LWIP需要编写程序应用层。-The archive is based STM32F103+ FreeRTOS+ LWIP source, FreeRTOS can run, but LWIP need to write program application layer.
Esp8266-WiFi_USART
- 可以实现ESP8266远程控制，AP,station和AP+station模式，手机和STM32f103开发板通信。-ESP8266 can achieve remote control, AP, station and AP+station mode, the phone and STM32f103 development board communications.
IIC_C51(STC89C52)_OLED6432_SSD1305
- 51单片机驱动64*32oled，显示屏驱动芯片为ssd1306-* File name: LQ12864.h * Project : OLED * Processor: STC89C52 * Compiler : Keil C51 Compiler
SPI_C51_OLED12864_SSD1306
- 51单片机SPI接口方式驱动12864OLED，OLED驱动芯片为SSD1306- File name: codetab.h * Project : OLED * Processor: STC89C52 * Compiler : Keil C51 Compiler
1650
- TM1650应用，包括LED显示与按键程序-TM1650 employ ,LED display and buttur
Transplanting-ucosII-to-MPC5554
- 工程将ucos_v2.84移植到Freescale的mpc5554单片机上，在Codewarrior2.6平台下编辑通过，且经过测试正常可用,内附有详细的移植过程介绍，源代码有详细说明，是学习移植ucos的好资料 -a demo project on how to transplante ucosii to mpc5554 with usefull introduction which is tested on codewarrior 2.6