资源列表
TMS320C2xC2xxC5x_
- TMS320C2x xC5x C编译器开发应用程序的步骤-TMS320C2xC2xxC5x C compiler development application steps
sp6ex4
- 流水灯实例，8个LED循环点亮，实现流水灯效果-Example of water lights, 8 LED cycle lit, to achieve the effect of water lights
sp6ex5
- 3-8译码器实验，用三个拨码开关控制8个LED中某一个点亮-3-8 decoder experiment, with three dial switch control 8 LED in a certain light
sp6ex6
- 按键消抖与LED开关实例，5个导航按键的按下与 否，对应控制LED D2/D3/D4/D5/D6的亮灭切换-Key debounce switch with LED example, 5 navigation keys and press No, the corresponding LED control D2/D3/D4/D5/D6 light off switch
vivado_LED_Flow
- 本例程使用vivado2014.4工具，利用xilinx Basys3 实验板实现板载流水灯的两种模式控制。-This project uses verilog HDL to realize the the control of 16 leds loaded on Xilinx Basys3 board.
SegSimplified
- 本工程使用verilog HDL和vivado2014集成开发环境实现利用xilinx Basys3开发板上4位数码管显示从0到9999的计数器功能。-This project uses verilog HDL to realise counting 0 to 9999 on the 7-seg LED loaded on Xilinx Basys3 board.
modbus-com
- modbus串口调试程序，发送命令给下位机，控制下位机并做出反应-modbus COMM program
SDC_TEST_Core0
- blackfin609 裸机读写sd卡,读写模式为spi模式。-read/write sd card on blackfin609 using spi protocol without os
BF707_AZURE_SPI2_FLASH
- blackfin707 基于spi1协议的烧写驱动，flash芯片mx系列-blackfin707 burn driver
yimaqi38
- 基于CPLD的38译码器程序设计，使用VHDL语言编程，38译码器显示在数码管上。-CPLD programming decoder 38 based on the use of VHDL language programming, the decoder 38 is displayed on the digital tube.
liushuideng
- 基于CPLD的流水灯实现，使用VHDL语言编程，闪烁间隔为0.5秒。-CPLD-based water lights to achieve using VHDL language programming, blinking interval of 0.5 seconds.
honglvdeng
- 基于CPLD的交通信号灯的实现，使用VHDL语言，使用不同颜色的二极管分别代表红黄绿三种信号灯。在数码管上可以分别显示倒计时。-CPLD-based implementation of the traffic lights, the use of VHDL language, using different colors of red yellow and green diodes representing three kinds of lights. On the digital countd