资源列表
ADC1_2classic
- DSP2812经典AD采样程序，ADC顺序级联方式，中断读数-DSP2812 classic AD sampling program, ADC sequential cascade, interrupt reading
led
- 初始化GPIO，使得GPIO的引脚处于已知的状态，例如确定其功能是特定功能,点亮小灯-Initialize GPIO, so GPIO pin is in a known state, for example, to determine its function is a specific function, lit a small lamp
int_cputimer011.6
- dsp2812使用CPU定时器0的周期中断来控制LED灯的闪烁-dsp2812 use CPU timer 0 interrupt cycle to control the LED light flashes
DSP28_Ev
- 初始化EVA或者EVB，本例中EVA和EVB均产生占空比为40 PWM波形，EVA下面的 定时器均工作于连续增模式，而EVB下面的定时器均工作于连续增/减模式，各 个全比较单元的死区时间为4.27us-Air ratio of 40 PWM waveform, EVA following timers are operating in a continuous growth mode, and EVB following timers are working in a continuous u
DSP28_Adc
- 对2812的AD模块进行初始化,运行于启动/停止模式,级联方式-2812 AD module to initialize, run in start/stop mode, cascade mode
DSP28_Sci
- dsp2812的SciA模块，通信数据格式为波 特率为19200，数据位8位，无极性校验，停止位1位-dsp2812 of SciA module for data transmission rate of 19200 baud, 8 data bits, no polarity parity, 1 stop bit
LCD1602
- LCD1602显示部分，可显示两行X,Y坐标显示值。-LCD1602 display part, can display two lines Y, X coordinates display value.
MT7620-V2
- 很火的路路器CPU MT7620，用它作的一个核心板，26mm*39mm，很小巧。-Very fire road, MT7620 CPU, using it as a core board, 26mm*39mm, very small.
Actuator-driver
- 舵机驱动程序，可控制驱动各种机器人数字舵机。同时可以控制180度，或360度舵机-Actuator driver, can be controlled to drive a variety of Robot Digital servo. At the same time can control 180 degrees, or 360 degrees steering gear
Touch-screen-display
- 触摸屏驱动板控制程序，可显示触摸屏触点坐标信息-Touch screen driver board control procedures, can display touch screen contact coordinates information
F405_MPU6050
- 主要针对STM32-F405开发板的六轴陀螺仪数据读取资料，可用于设计速度环位置环等反馈环。-Mainly containing STM32F405 controller ,reading the data about its 6050
F405_CAN
- 主要关于STM32F405开发板上的CAN通信源码，可嵌入到开发板运行，结合LCD显示屏进行数据显示。-About STM32F405 main development board CAN communication source, can be embedded into the development board to run, combined with the LCD monitor for data display.