资源列表
BST-BMI160-DS000-07
- BMI160寄存器手册，东芝加速规，手册描述详细，方便开发。-BMI160 register manual, Toshiba speed gauge, manual is described in detail, for development.
EDA
- 用VHDL语言编写的各种小模块，有走马灯，计数器，循环寄存器等-VHDL language with a variety of small modules, there is a revolving door, counters, registers, and so the cycle
Car-lights-control
- 汽车信号灯控制，通过按键实现左右转，刹车，停车，倒车等-Car lights control, left turn, brake, stop, reverse, etc. through the key
sleep
- 基于EFM32芯片和FREERTOS结合的休眠控制函数，直接添加在项目中，调用接口即可。-Based on EFM32 chips and FREERTOS dormancy control function, added directly in the project, call interface.
AT89C51
- 单片机AT89C51多种实验例程（C与汇编对照），LED灯、蜂鸣器、红外遥控等各种功能的实现。-Various functions of the microcontroller AT89C51 various experimental routines (C and assembler control), LED lights, buzzers, and other infrared remote control.
ipc
- 基于EFM32 CM3核 FREERTOS 的信号量管理代码，包含freertos中所有相关信号量的控制。-Based on EFM32 CM3 nuclear FREERTOS semaphore management code, included FREERTOS all related semaphore control.
Uart1234
- STM32F207 UART DMA方式发送-stm32 f207 usart dma send way
check(sum_crc)
- 校验和CRC校验使用，直接调用API即可，使用时保证两端参数一致。-Use the checksum CRC check, calling the API directly, ensure both ends when using parameters.
5kg-pressure-sensor
- 5kg 压力传感称重，有基于51的代码 在1602显示 有基于arduino的串口显示代码-Pressure sensing weighing 5kg, a display code is based on Code 51 is displayed in 1602 have based serial arduino
Flowcode-lamp
- flowcode 流码流水灯, 用于快速学习流码控制流程.-flowcode followlamp source
max6675
- 实物调试：max6675温度采集模块与Atmega128a单片机SPI通信，并通过共阳极数码管显示-Real debugging : max6675 temperature acquisition module with Atmega128a MCU SPI communication, and through digital tube display common anode
PID
- 实物调试：位置式PID调节PWM占空比控制电动机转速-Real debugging : Positional PID control- motor speed control PWM duty ratio