资源列表
_led
- Led simulation and c file.
lcd_interface
- LCD interface proteus simulation and embedded x code.
My_led
- Led interface simulation and code.
seven_segment
- 7 segment display interface c code ans simulation.
BS83B12A-3_ULIB_V10
- 1.BS83B12A-3芯片内部外设程序库 2.V10支持时钟，定时器，EEPROM-1. BS83B12A- 3 chip internal peripherals library Block 2. V10 support clock, timer, EEPROM
STM8S_ULIB_V10
- 1.STM8S系列IC内部外设驱动 2.V10支持CLK、TMR1、TMR4、TMR2、UART1、UART2、EEPROM、IIC、SPI控制 3.基于寄存器方式-1. STM8S series IC internal peripheral drive 2. The V10 support CLK, TMR1, TMR4, TMR2 block, UART1, UART2, EEPROM, IIC, SPI control 3. Based on the register
1602_1
- 此文件为uvision4的可执行文件，是利用STC89C51单片机驱动1062显示器的可执行源程序-This file for the uvision4 executable file, is the use of STC89C51 microcontroller to drive the 1062 display of the source code can be d
.c
- 基于使STM32cortex-m3内核的HMC5883驱动程序，通俗易懂，方便移植。-The diver of HMC5883
90c52-DS1302-OCMJ4X8B-2
- 利用STC90C2RC单片机读取DS1302时钟和DS18B20,在OCMJ4X8B-2液晶上显示.-Use STC90C2RC microcontroller reads the DS1302 clock and DS18B20, are displayed in the LCD OCMJ4X8B-2.
F2812
- 这是DSP2812教程文件，包含DSP基础，如工程的建立，GPIO口的设置等。-This is the DSP2812 tutorial files, including DSP-based, such as the establishment of the project, GPIO port settings.
24C256-OCMJ4X8B-2
- 程序主要是实现:利用单片机的定时器0设计的显示年月日星期时分秒,把数据存在24c64中,显示在lcdOCMJ4X8B-2中.-Program is to achieve: use of MCU timer 0 designed display every second day, the day when, the data exists 24c64, the display in the lcdOCMJ4X8B-2.
TFTLCD
- 实现lcd驱动hao haohohaohoa ho。-LCD driver to achieve