资源列表
Ad
- AD外设实验，将模拟信号输入给AD外设，AD外设将会转换成数字信号送给数码管显示对应的电压值-AD peripheral experiment, the analog signal input to the AD peripherals, AD peripherals will be converted into digital signals to digital tube display corresponding voltage value
Da
- DA外设实验，将数字信号输入给DA外设，DA外设将会转换成模拟信号进行输出1KHz的正弦波。需要使用示波器进行测量-DA peripheral experiment, the digital signal input to the DA peripherals, DA peripherals will be converted to analog signals, output 1KHz sine wave. Measurements need to be carried out using a
20kW inverter based on DSP
- 本源代码为基于TMS320LF2407A的DSP所编写的pjt文件，文件中包含CCS运行所需的所有源代码，包括主程序、头文件、库文件等。本程序所实现的功能是2Okw光伏并网逆变器并网，可实现电池板最大功率点跟踪和并网功率因数0.99以上。
DIBC-concrol
- 介绍了无刷直流电动机的工作原理,导通方式,通过对数学模型的分析建立了仿真模型,并采用双闭环控制进行了仿真。-The working principle and conduction mode of the brushless DC motor are introduced. The simulation model is established by analyzing the mathematical model, and the simulation is carried out by do
20kW--inverter-based-on-DSP
- 本程序为三相三线制20kw光伏并网逆变器程序，可实现光伏电池最大功率点跟踪，并网功率因数0.99以上-This procedure for the three-phase three-wire 20kw photovoltaic grid-connected inverter program, can achieve the maximum power point tracking photovoltaic cells, and network power factor of 0.99 or m
measure
- 深圳锐能微电子RN8209C驱动程序，该芯片为单相计量芯片，串口通讯，带奇偶校验。-Shenzhen Rui can microelectronics RN8209C driver, the chip for single-phase metering chip, serial communication, with parity.
test_alsa
- alsa 音频播放测试 c语言 gyp自动生成make 测试成功的-alsa c demo ./gyp.sh ./run file.wav
bldcpwm源代码
- 直流无刷电机PWM发生器程序源代码。dsp选用的是ti 28335
12864V1.0-
- 12864在C8051F320上的显示，使用8位I/O并口传输方式-12864 diaplay at c8051f320
tx
- 串口通讯，获取实时温度，并用串口发送。使用开发板测试。-Serial communication, access to real-time temperature, and use the serial port to send. Use the development board test.
clock
- 基于单片机的数字钟，带星期、月份、年份显示，可设置闹钟，闹钟声音由蜂鸣器发出。-Digital clock based on single chip, with week, month, year show, you can set the alarm clock, alarm sound by the buzzer.
SigleBusSensorforSTM8
- 单总线传感器应用于STM8系列单片机的主机程序，可以定时从串口输出数据。-wire sensors used in the STM8 series monolithic integrated circuit host Program, can be scheduled the serial port output data.