资源列表
Template 点亮LED
- 基于stm32的点亮流水灯实验，需要在对应平台使用(Based on the stm32 lit water test, you need to use the corresponding platform)
Template按键实验
- 基于stm32的按键实验，需要在对应平台使用(Based on stm32 key experiment, you need to use the corresponding platform)
STC15-4jdq
- 基于STC15开发的蓝牙模块控制4路继电器模块源程序及原理图(STC15 based Bluetooth module control 4 relay module source code and schematic diagram)
1.工程的建立
- STM32F407ZG在MDK5上的工程模板，有库函数，寄存器两个版本(STM32F407ZG project templates on MDK5,there are library functions, registers two versions)
AD9777
- 基于FPGA平台设计的AD9777芯片的代码(AD9777 chip design based on FPGA platform code)
DSK6416代码
- 基于6416开发板的程序，基本驱动都有，很不错(Based on the 6416 development board procedures)
bin2txt_931
- dhy vuter powertom hyf
cantest
- can功能测试代码，c++编写，测试通过的，欢迎下载使用(wince 6.0 can test app)
AM2320
- 在Keil5平台上，用单总线实现AM2320的温度湿度采集的STM32F411程序。(In the Keil5 platform, using single bus to achieve AM2320 temperature and humidity collection of STM32F411 program.)
I2C_slaver_verison3.0
- I2C从机模块，包含testbench，平台是vivado,仿真测试通过。(I2C slave module, including testbench, the platform is vivado, simulation test passed.)
closed-loop control .X
- 程序包含闭环控制技术以及实时检测功能，可以将传感器的信号作为反馈量，实时调节控制的状态，达到最优控制的目的。(Program includes closed-loop control technology and real-time detection function.Adjust the state of the control in real time to achieve the purpose of optimal control.)
UART.X
- 利用串口与上位机通信，实时采集电信号并显示，最后以通信的方式返还给上位机。(Using serial port to communicate with the host computer, real-time acquisition of electrical signals and display, and finally return to the host computer by means of communication.)