资源列表
2.13inch_e-Paper_HAT-code
- 用于驱动2.13英寸的墨水屏，电纸屏。包含arduino、STM32平台的源码。(Used to drive an ink screen of 2.13 inches, an electric paper screen. Contains Arduino, STM32 platform source code.)
ANO-MR-F1-140104经典pid
- 四旋翼飞行器源码，6轴传感器，PID控制，亲测可用(Four rotor aircraft source code, 6 axis sensors, PID control, pro test available)
0_Prewitte
- 基于嵌入式DSP的图像处理算法，用来对图像进行处理(Based on embedded DSP image processing algorithms)
UART
- verilog IO模拟串口,用IO模拟uart进行串口通讯，无需硬件串口(Verilog io analog serial port, using io simulation UART serial communication, no hardware serial port)
cordic
- cordic算法的verilog实现，适用于学习。(The verilog implementation of CORDIC algorithm is suitable for learning.)
步进电机
- 51单片机控制步进电机程序，仅限于学习。(51 single - chip microcomputer control step motor program, only for learning.)
music
- 51单片机音乐盒，内有天空之城等音乐，蜂鸣器播放，带有上一曲，下一曲，暂停等按键。(51 single - chip computer music box, the city of sky and other music, the buzzer playing, with the previous song, the next song, pause, and so on.)
译码器动态显示
- 动态译码管的显示程序，原创，适用于学习。(Dynamic decoding tube display program, original, applicable to learning.)
STM32F407输入捕获代码
- STM32F407输入捕捉代码，能测量输入信号的高、低电平时间，频率等，最高测量频率可达20MHz(STM32F407 input capture code, can measure the input signal of high, low level, time, frequency, etc., the highest measurement frequency of up to 20MHz)
97957700spi
- 验证过的程序 ，平时自己测试用的，供大家参考使用。(Own serial test procedures, validation, and very complete. For your reference use)
main
- 根据STM32寄存器地址，配置P0~P3为推挽输出，点亮LED灯。(According to the STM32 register address, the configuration P0~P3 is push-pull output, and the LED lamp is lit.)
C
- MSP430F5529例程，可以进行开发板练习(MSP430F5529examples, for practice)