资源列表
MWC基于STM32移植版
- mwc飞控stm32硬件。。。。。。mwc程序移植到stm32平台运行(MWC flight control STM32 hardware...... MWC program porting to STM32 platform)
avalon-i2c
- 基于verilog的I2C实现，可以通过软核或者ARM核进行控制哦。(The implementation of I2C based on Verilog can be controlled by soft core or ARM core)
SSD1963
- 可以直接用的SSD1963驱动源码,主控芯片STM32F103CET6 ,采用FSMC总线的读写方式。(This source code can be directly used for the chip-SSD1963 driver ,and the main control chip if STM32F103CET6 which using FSMC bus R/W mode.)
FT5426
- 基于电容式触摸采集芯片FT5426的驱动程序，可直接使用，主控芯片为STM32F103CET6.(Based on the capacitive-touch acquisition chip(FT5426)driver, can be used directly when main-control-chip using STM32F103CET6.)
L1
- 这是一份关于msp430G2553的例程(a msp430g2553 example)
GMR2.0
- 通过SSC高速串口，利用霍尔元件TLE5011，校测计算转动角度(Through the high-speed serial port of SSC, the rotation angle is measured by using Holzer component TLE5011)
KZF-9要的-3
- 智能控制控制阀检测设备的通断，进而判断产品性能(The intelligent control valve detects the on-off of the equipment, and then judges the performance of the produc)
STM32模板
- stm32开发模板， 有了这个，再也不用每次创建项目时添加文件。(STM32 development templates, with this, and no longer need to add files every time you create a project.)
pg058-blk-mem-gen
- blockram的手册，适合开发者使用是xilinx的(Blockram manual, suitable for developers to use, is Xilinx)
Matlab_Butter
- 用C语言实现matlab的butter函数中低通和带通功能,高通和带阻没写,有兴趣的可以自己加入.(Using C language to achieve matlab butter function low-pass and band-pass function, high pass and band stop did not write)
S3E-1600_A
- xilinx s3e 1600 kit files
GPIO_IOToggle
- 对gpio的控制，拉高拉低的功能实现，芯片选型为stm32f413.(The control of the GPIO, the realization of the function of the low Lagaola.)