资源列表
单片机2
- 加热功能，使用方便，功能比较多，程序设计不是太难。。。。。(Heating function, easy to use, more functions, program design is not too difficult.)
CH554MCU_USB通讯例程
- 带USB接口的51单片机芯片ch554的调试程序,可以模拟鼠标键盘设备实现免驱动识别和通讯(ch554 MCU with USB interface demo program,can Identifying and communicating like a keyboard or mouse)
1602显示
- 51单片机液晶显示程序,包含源代码，初始化代码，低层的硬件驱动代码等。(51 singlechip LCD display program, including source code, initialization code, low level hardware driver code and so on.)
NRF24L01一对一接收模块
- 基于51单片机的2.4G收发程序，里面包含工程文件。(2.4G transceiver based on 51 single chip microcomputer, which contains engineering documents.)
led
- 利用stm32实现两个led的跑马灯程序(Two LED using STM32 to achieve marquee program)
PWM
- 利用Verilog语言设计一个PWM控制器，实现：控制器输入时钟1MHz；控制器输出脉冲周期1kHz，脉宽最小调节步长0.1%。(The Verilog language is used to design a PWM controller, which is realized: the controller input clock 1MHz; the controller output pulse cycle 1kHz, and the pulse width minimum adjustme
pci9504
- Verilog 语言编写 PCI9054 控制器的接口电路，实现 PCI总线到本地 8 位总线的转接控制(The Verilog language writes the interface circuit of the PCI9054 controller to realize the transfer control of the PCI bus to the local 8 bit bus)
stm32
- STM32和FPGA通信，采用SPI的方式实现(Communication between STM32 and FPGA Implementation in the way of SPI)
stm32
- 用STM32F103采用SPI的方式实现与ADF4351的通信 ，实现锁相环芯片的控制(The communication with ADF4351 is realized by using SPI in the way of STM32F103, and the control of the PLL chip is realized)
stm32
- 实现了STM32座FFT功能，不需要FPGA,只需要STM32就可以实现(The implementation of the STM32 seat FFT function, do not need FPGA, only STM32 can be implemented)
stm32
- STM32F103实现低频任意波形发生器，实现波形发生功能。(STM32F103 realizes low frequency arbitrary waveform generator, and realizes the function of waveform generation.)
stm32
- STM32F103实现控制DDS模块的功能，采用SPI通信的方式(STM32F103 realizes the function of controlling the DDS module and uses the SPI communication mode)