资源列表
qp_nano移植到arduino上
- qp_nano移植到arduino上。blinky小灯闪烁的例子。 文件： blinky.ino blinky.h blinky.cpp bsp.h bsp.cpp 再将qp的库文件拷贝到arduino的libraries文件夹中即可。
05button
- 蜂鸣器的程序，适用于STM32例程。适用于新手(The buzzer program is applicable to the STM32 routine. For novice)
stm8AF
- STM8AF系列CAN BUS, USART, I2C, TIMER, ADC範例(STM8AF series CAN BUS, USART, I2C, TIMER, ADC example)
Desktop
- 实现了3-8译码器的组合逻辑和时序逻辑，正确性已经通过了仿真验证，代码规范(The combined logic and timing logic of the 3-8 decoders are implemented. The correctness has already passed through the simulation verification, the code specification)
各种电机的DSP控制程序
- 非常有用的DSP电机驱动源程序，与大家共享(here is very important pm motor drive program)
888光立方程序
- 基于51单片机的光立方程序，代码与资料，外加动画频谱(Optical cubic program based on 51 Singlechip)
计网第一次实验
- none to use if you are kiding
PWM（恒速运行）
- PWM恒速运行 通过本例程了解pwm的基本原理 请将直流电机线接在+5v p12对应的端子上（步进马达接口出）(PWM constant speed operation Understand the basic principles of PWM by this routine Please connect the DC motor to the terminal of the +5v p12 (step motor interface).)
STM32F103ZET6 CAN
- STM32F103ZET6 CAN总线开发程序(STM32F103ZET6 CAN bus development program)
STM32USB
- STM32的USB程序开发实例心得,可做开发使用(STM32's USB program development example)
倒车
- 基于stm32f103 实现三路超声波测距(Three way ultrasonic distance measurement based on STM32F103)
grbl-builds-master
- GRBL插补运算，可用于三轴数控机床的控制，设计步进电机的加减速控制以及通讯(GRBL control Can be used for the control of three-axis CNC machine tools, design stepper motor acceleration and deceleration control and communication)