资源列表
CECOM
- wince平台下的串口调工具,可执行文件,比较小巧,灵活(Wince serial port tuning tool,Executable file)
ARM入门教程(北大版)
- 北京大学现代教育技术中心崔光佐老师编写的关于ARM嵌入式开发的入门教程(An introductory tutorial on ARM embedded development)
TASKMGR
- wince平台的下的任务管理器,可以帮助开发者查看任务运行状态,如CPU占用,内用占用等,且可以结束某一个进程.相当于windows平台的任务管理器功能.解决了wince平台下无任务管理器的问题.(The task manager under the wince platform can help developers to see the running status of tasks, such as CPU occupancy, internal use and so on, and ca
iproute2-master
- 可以用来编译ip等工具，适合进行嵌入式交叉编译移植ip功能(It can be used to compile tools such as IP, suitable for embedded cross compiling to transplant the IP function)
Ex01_POP28335_Timer0_LED
- 亲测有效的28335定时器代码，能正常进定时器(28335 timer can properly overcome timer problems)
STM32程序
- 分别控制四路电机转动，转速以正弦规律变化。与计算机进行串口通信，可用串口控制转速，位置控制。(The rotational speed of the four motor is controlled by the sine law. Serial communication with the computer, using serial port to control the speed, position control.)
lesson5_1
- 实现51单片机的定时/中断功能，在流水灯上的实现。(Realizing the timing / interruption function of 51 Singlechip)
main
- 基本IO功能,按键点亮LED,按键按下,LED亮起(Basic IO function, button to light LED, button press, LED light up)
01-MINI电子琴
- 通过矩阵按键实现1,2,3,4,5,6,7,当有按键按下时,led会亮起,说明按键有效,同时发出声音(The 1,2,3,4,5,6,7 is implemented by a matrix button, and when the button is pressed, the LED will light up, indicating that the key is valid and the sound is made.)
02-电子时钟
- BW-DK5438开发板电子时钟程序 ,在数码管上显示RTC时钟，亮度依次递增(BW-DK5438 development board electronic clock program, display RTC clock on the digital tube, increasing brightness in turn)
03-电子温度计
- BW-DK5438开发板电子温度计程序 在数码管上显示检测到的温度值(BW-DK5438 development board program / electronic thermometer display temperature value detected in the digital tube)
09-红外收发器
- PC上运行串口大师等串口调试软件，通过USB接口向开发板发送数据, 开发板收到数据帧后，将其由红外端口发送；如开发板接收到红外信号，当红外端口接收到完整数据帧后，开发板将数据由USB口送至PC。本程序未采用NEC或Philips的红外协议，旨在展示一种像使用串口一样 使用红外接口的方式，实验表明，这一方法十分有效，在1200bps、3米 距离的条件下仍有非常好的收发效果。(PC run serial master serial debugging software to se