资源列表
Acr122U-IC
- 采用NXP出品的高集成度PN532读写芯片， 符合ISO/IEC18092（NFC）标准，兼容ISO14443（Type A、Type B）标准。采用USB接口与电脑进行通讯及供电，不但可以读取符合Mifare标准的Classics（M1、M4、MUL）和DESFire卡，还支持FeliCa卡等符合NFC规范的非接触式IC卡。(IC card and entrance guard card reading and writing)
W25Q256四字节读写程序
- W25Q256四字节读写程序实例，非常实用(W25Q256 four byte read and write program instance)
test_gpio
- 实现对DSP C6657的gpio的配置： 包括设置输入输出方向和赋值操作。(Implement the configuration of the GPIO for DSP C6657: It includes the setting of the input and output direction and the assignment operation.)
test_timer
- 实现对dsp C6657的定时器模块的配置。 本例中配置为64位通用定时器模式，工作于中断模式。(Realize the configuration of the timer module for DSP C6657. This example is configured as a 64 bit general timer mode, working in interrupt mode.)
sensor_LIS3DH_driver
- 加速度传感器 LIS3DH 的驱动参考代码(acceleration sensor LIS3DH driver code)
数字系统设计大作业
- 清华大学数字系统设计大作业，基于BF609的七段均衡器(Seven-band equalizer based on BF609)
Siemens200smart
- 西门子PLC S7-200，200smart, 300 & S7-400系列TCP连接上位机程序，无需PLC端再编程, 免费，支持24点数。(SIEMENS PLC S7-200200smart, 300 & S7-400 series TCP connection PC program, without the PLC end reprogramming, free, support 24 points.)
mlx90614
- 基于stm32的MLX90614红外测温模块驱动。(MLX90614 infrared temperature measurement module driver based on stm32.)
WirelessConect
- 基于stc89c51的433M的无线通信(Wireless communication of 433M based on STC89C51)
28035ecantest
- 28035CAN的单片机代码程序 ecantest(28035CAN cantest cantest dsp embeded system)
lesson6 SysTick-系统定时器
- SysTick 寄存器配置 SysTick 配置项 SysTick 中断配置流程 SysTick 中断处理流程(SysTick register configuration SysTick configuration item SysTick interrupt configuration process SysTick interrupt processing flow)
USBH_D_Demo
- 程序实现了MSC主机和CDC设备的功能。(usb ote autocheck host and device)