资源列表
HS1101
- 单片机控制湿度传感器HS1101测量系统湿度程序。精度还可以-microcontroller to control the humidity sensor HS1101 humidity measurement system procedures. Accuracy can also
51-ucosii
- 该程序是ucosii在５１单片机上的移置，以ＫＥＩＬ为开发环境-that the procedure was ucosii in MCS-51 shift on the home, as a development environment KEIL
echotest
- 该文件是ＵＣＯＳＩＩ下的ＴＣＰ／ＩＰ移植程序（一）-UCOSII the document is under the TCP / IP transplant procedures (1)
ppp_test
- 该文件为ＵＣＯＳＩＩ下的ＴＣＰ／ＩＰ移植（二）-UCOSII for the document under the TCP / IP transplantation (2)
c8051f040_can
- 这是c8051f040的CAN应用程序，实现040CAN之间的通信-CAN applications and realize the communication between 040CAN
SJA1000自测程序
- CAN总线控制器SJA1000的自测程序，硬件是利用SJA1000tx1管脚发出接收中断-SJA1000 CAN controller of the self-rated procedures, the hardware is used to give an acceptance SJA1000tx1 pin interruption
dmaSoftwareCode
- blankfin 的 dma 驱动控制代码-blankfin the dma driven control code
srcSoftwareCode
- 在blankfin中 实现src 的程序-blankfin in achieving src procedures
PCIexampleSoftwareCode
- blankfin 中实现pci的例子程序-blankfin achieve pci examples of procedures
doc(uCOS51移植心得等系列文档打包下载V1.0)
- doc(uCOS51移植心得等系列文档打包下载V1.0)，好东西呀！-doc (uCOS51 transplantation experience a series of packaged files downloaded V1.0), the good stuff!
C8051F040_CAN_block
- This program configures the external memory interface and CAN to receieve data in a FIFO buffer and store the data in XRAM. Meant to receive data from another CAN device.-This program configures the external memory interface and CAN to receieve data
C8051F120_ADC
- This program prints the C8051F124 die temperature out the hardware UART at 115200bps. This example uses the internal 24.5MHz oscillator multiplied by 2 using the on-chip PLL (SYSCLK = 49MHz).-This program prints the C8051F124 die temp erature out at