资源列表
ourdev_391197
- 通过keil编程实现PT2262与PT2272通信-Keil programming through PT2272 communication with the PT2262
WIGGLER2
- wrigler schematic to download
ucos_led
- 这是与TX-3C开发板配套的程序 这是用来测试LED灯的程序-This is the TX-3C with the development board supporting the process which is used to test the procedures for LED lights
increse_led1
- 单片机的P1口的LED实现渐明渐暗的效果 P1口接8个LED，灌电流改变占空比来调整亮度-P1 port MCU LED to achieve the effect of gradually dimming out then P1 I 8 LED, Sink to adjust the brightness to change the duty cycle
covevisionavr_manual(english)-ym3934
- Codevision AVR Manual
lcd_hwx
- 实验目的：了解液晶显示的基本原理 了解红外线的工作原实验内容：对 (康佳 KK-Y252 )遥控器的解码 系统采用 AT89S52 进行解码实验, fosc = 11.0592 MHz-Experimental Objective: To understand the basic principles of liquid crystal display understanding of the work of the infrared content of the original experi
keys_leds
- 程序详细功能介绍：AT89S51单片机的P0.0－P0.3接四个发光二极管L0－L3，P2.0－P2.3接了四个按键K0－K3，编程将按键的状态反映到发光二极管上。（按住按键，对应的灯亮，松开按键，对应的灯灭）。 L0对应显示K0状态, L1--K1 , L2--K2 ,L3--K3-Features program details: AT89S51 MCU P0.0-P0.3 four light-emitting diodes then L0-L3, P2.0-P2.3 next four
18b20_LED
- 数字温度传感器DS18B20，通过AT89S52进行控制，在数码管上显示，精度在0.1度-Digital temperature sensor DS18B20, through AT89S52 control tube in the digital display, accuracy of 0.1 degrees
lcd_887_temperture
- 本程序以DS12C887为主控芯片，温度用DS18B20，星期的显示以字母的形式显示，星期自动对应。-This procedure for the master to DS12C887 chip temperature with DS18B20, week showed the form of the letter shows that the corresponding week automatically.
wind_meter
- MSP430 based wind meter, measure direction and speed.
SRC
- 三星开发板源程序，包括主程序，下载程序，显示程序等-Samsung source development board, including the main program, download, display program, such as