资源列表
adc
- 实验目的：熟悉A/D转换，软件思路：选择RAO做为模拟输入通道，连续转换4次再求平均值做为转换结果-The experiment was: familiar with the A/D conversion, software ideas: Select RAO as analog input channels, 4 times longer for the conversion as the conversion results for the average
dac
- 实验目的：熟悉D/A转换芯片的使用，待转换的数据送D/A芯片TLC5615，开启D/A转换，用万用表或者示波器观察输出口（CON36）的电压-The experiment was: familiar with the D/A converter chip, the use of the data to be sent to convert D/A chip TLC5615, open D/A conversion, using a multimeter or oscilloscope to ob
ds18b20
- 实验目的：熟悉DS18B20的使用，六位数码管显示温度结果，其中整数部分2位，小数部分4位，每次按下RB0键后进行一次温度转换。-Experimental Objective: DS18B20 familiar with the use of six digital display temperature results, in which two integer part, fractional part of four, each time after pressing the button
ee24_h
- 实验目的：熟悉MSSP通信协议。当按键RB0按下时，把6个连续的数据写入到6个连续的单元内，写完成后数码管显示单个0，做为完成标志位，当按键RB1按下后读取EEPROM连续六个单元读取结果送6位数码管显示-Experimental Objective: MSSP familiar with communication protocols. When the button is pressed RB0 to 6 consecutive write data to the unit for six
ee9346_h
- 实验目的：熟悉SPI总线以及9346EEPROM的读写，RBO键按下时把DATA和DATA2写入到EEPROM中以EE—ADDR为地址的单元内，完成后，单个数码观显示“9”做为完成标志，RB1键按下时，读取EEPROM中以EE—ADDR为地址的单元，并送数码管显示-Experimental Objective: 9346EEPROM familiar with the SPI bus as well as reading and writing, RBO key press DATA2 when
ARMInstructionSets
- ARM Instruction Sets. ARM 的常用命令集-ARM Instruction Sets.
AD
- 关于AD转换的程序设计，自己设计的，仅供大家参考，如有雷同纯属巧合-AD conversion process on the design of their own design, for your reference and any similarity is purely coincidental
DesignAndTestifyVerilogHDL
- 《设计与验证VerilogHDL》书中程序-design and testify VerilogHDL
at91_led_blinking_patterns.c.tar
- LED blinking code for at91sam9260
board-eye02.c.tar
- Board_eye.. to use board peripherals
RGB2YUV_src
- 实现RGB到YUV的转换，并且有效果图,很好用，大家可以看看！-RGB TO YUV YOU WILL LOVT IT ,I BELIEVE!