资源列表
timer-program
- 这是一个定时器程序，算是编程的核心，但是程序是初级的，建议初学者下载。-This is a timer program, regarded as the core programming, but the program is preliminary, and is recommended for beginners to download.
dds9850
- 控制AD9850模块产生相应频率的波形，只需改变相应参数就可达到9850和9851均可使用和串并口切换， 内带详细说明-Control AD9850 module generates the corresponding frequency waveform, just change the corresponding parameters can reach 9850 and 9851 can be used, and serial and parallel switching, with a
c51.6x6led
- 4乘4键盘控制的6乘6的发光二极管显示数字0到9-4 x 4 6 x 6 keyboard control of light-emitting diode display numbers 0-9
PWM1
- MSP430F149单片机生成PWM波程序，IAR环境-MSP430F149 microcontroller PWM wave generated program, IAR environment
snake
- 贪吃蛇源码，仅供参考-Snake source code for reference purposes only. . . . . . . . . .
type
- 一些宏定义的头文件，单片机开发必备-Some of the macros defined in the header file, microcontroller development must,,,,,
clock_mega
- atmega单片机写的时钟万年历，极具参考价值-atmega microcontroller write clock calendar, great reference value. . . . .
DZP
- 点阵屏 做计时器，外加光电开关，适合竞赛用-this is a timer that is compilered by C
dul-pwm
- 基于单片机的多路pwm输出的方法研究，-Microcontroller-based multi-channel pwm output method. . .
1602P52-dianzizhong
- 基于52单片机的定时器0和键盘，1602写的简单时钟，不带掉电保护-Based on 52 single-chip timer 0 and keyboard, 1602 to write a simple clock, with no power-down protection
counter
- STC12C2052单片机计数器，利用Keil uVision4开发，根据需要，可以改成1位、2位、3位、4位、5位等计数器。-STC12C2052 chip counters, use Keil uVision4 develop, if necessary, can be changed to 1, 2, 3, 4, 5 and other counters.
5.7-permanent-calendar
- 基于STC12C5A60S2的5.7寸(A8806)LCD电子万年历,可通过外遥控器进行功能设置,自动调节背光,闹钟,等-Based STC12C5A60S2 5.7 inch (A8806) LCD electronic calendar, can be carried out by an external remote control function is set to automatically adjust the backlight, alarm clock, etc.