资源列表
pwm_led
- 这是一个51单片机模拟PWM输出的例程,利用改变时间的占空比来调节LED的亮度变化。-This is a 51 single-chip analog PWM output routines, by changing the duty cycle of time to adjust the LED brightness changes.
DS18B20
- 这是一个DS18B20的测试温度程序。此程序可以用数码管显示，并且可以准确显示 -30-80度。非常适合移植。-This is a test DS18B20 temperature program. This procedure can be with digital display, and can accurately display-30-80 degrees. Very suitable for transplant.
LPC915-BAT--charging
- 这是一个利用LPC915小型廉价芯片在做充电器，在松下的产品里有用过。可以控制LI电池充放电。-This is a small, inexpensive chips using the LPC915 doing charger, the Panasonic has used the product. Can control the LI battery charge and discharge.
1100
- cc1100 控制程序 基于51单片机的程序 亲测可用-cc1100 control procedures based on 51 SCM procedures pro-test available
74LS595--for--LED-SCREEN
- 74LS595在LED screen上的应用很多，主要用于级联显示数据。本例演示了595的基本应用，方便移植使用。-74LS595 application on the LED screen a lot, mainly for cascading display data. This example demonstrates the basic application 595 to facilitate the use of transplantation.
c51source
- ILI9481驱动3.5吋TFT的C51程序源码-3.5-inch TFT ILI9481 drive the C51 program source code
flexcan
- 飞思卡尔V2系列flexcan控制器收发程序，可以查询方式发送，中断方式接收，开双缓冲-Freescale V2 Series flexcan controller transceiver program, you can send queries, interrupt receiving, open double buffering
CLOCK
- MSP430 F6736时钟配置和UCS配置例程-MSP430 F6736 clock configuration and UCS configuration routines
PID
- 这是一个关于巡线小车的全方位编程，已经通过硬件实现了其功能！其中是8个数码管接收器进行巡线，线的长度为2cm左右，可以进行各种巡线拐弯，十字架，以及虚线，在走偏后，还能回转继续寻找线路！-Patrol robot programming
LAB-10-UART
- MSP430fg4619单片机异步串行口例程-MSP430fg4619 chip asynchronous serial port routines
LAB-08-DMA
- MSP430fg4619单片机DMA例程-MSP430fg4619 chip DMA routines
LAB-01-IO
- MSP430fg4619单片机IO口驱动LED闪烁程序-MSP430fg4619 microcontroller IO port drive LED blinking program