资源列表
STM32-SPWM
- stm32产生spwm程序，利用TIM1和DMA，通过PA8和PB13输出spwm波-stm32 produce spwm program, using TIM1 and DMA, and PB13 through PA8 spwm wave output
STM32-nokia5510
- stm32液晶显示程序，液晶使用nokia5510，使用PA0，PA1，PA2，PA3，PA4连接nokia5510-stm32 LCD procedures, the use of LCD nokia5510, use PA0, PA1, PA2, PA3, PA4 connection nokia5510
89c52_12864_code
- 单片机开发。89c52实现12864带字库显示，供新手学习用-SCM. 89c52 12864 with font,
adShow_spad
- 包含ADS7841数模转换驱动，1602LCD显示驱动-Includes digital-analog conversion ADS7841 driver, 1602LCD display driver
AT24C02
- AT24C02 驱动代码。实现断电保存，示例代码实现从AT24C02读取数据-AT24C02 driver code. Achieve power saving, the sample code to read data from the AT24C02
DS18B20
- DS18b20驱动程序，从DS18B20读取温度值，在led中显示-DS18b20 driver read the temperature value from DS18B20, the led display
two_serial_port_RS
- STC12C5A60s2单片机实现双串口的数据交换，串口1接收到的数据通过串口2发送出去，串口2接受到得数据通过串口1发送出去-STC12C5A60s2 MCU dual serial data exchange, the serial data received through a serial port 2 to send out, receive data from the serial port 2 sent via the serial port 1
EX1_LED
- ME850 单片机开发实验仪演示程序功能简介： EX1_LED （LED闪烁） P0、P2 端口的LED 亮300ms，灭300ms，如此循环。 -ME850 SCM experimental instrument demo Features: EX1_LED (LED flashes) P0, P2 port LED light 300ms, off 300ms, so the cycle.
EX2_LEDX8
- AT89c51 EX2_LEDX8 （流水灯） P0、P2 端口的LED 先从左至右方向流水灯显示， 再从右至左方向流水灯显示，如此循环。-AT89c51 EX2_LEDX8 (light water) P0, P2 port LED water light show to start left to right direction, then from right to left direction water light show, and so on.
EX3_RELAY
- c51系列 EX3_RELAY （继电器控制） K1- 吸合键，K2- 释放键 按 K1 键，继电器吸合，LED灯亮。 按 K2 键，继电器释放，LED灯灭。-c51 series EX3_RELAY (relay control) K1-pull button, K2-release button press K1 and relay, LED lights. Press K2 key, the relay releases, LED lights off.
EX5_7SEG
- c51 EX5_7SEG （数码管显示0-7） 8位数码管显从左至右依次显示0-7。-c51 EX5_7SEG (digital display 0-7) 8 digital tube display from left to right shows 0-7.
16x16
- 16×16点阵显示屏-1616 dot matrix display