资源列表
LEDtest
- 利用单片机作为芯片，利用点阵按钮通过继电器控制LED灯-Using single chip microcomputer as a chip, using bitmap button by relay control LED lights
LED
- 利用单片机作为芯片，利用点阵按钮通过继电器控制LED灯(电路图)-Using single chip microcomputer as a chip, using bitmap button by relay control LED lights
RS485-2
- DMAVR-L的RS485通信示例程序，采用串口1，发送采用查询方式，接收采用中断的方式 通过串口调试助手将16进制数据发送到系统板，系统板再发回电脑，在串口调试助手中显示出来-DMAVR-l RS485 communication example program, use the serial port 1, and send the query, receive adopt the way of interruption Via a serial port debugging ass
DACsine
- 基于arm的DA转换代码，是源码，已做成压缩包 -Programmable filter design
wide
- 基于430捕获功能，可以精确测量信号的频率，在低频的时候误差在1hz，相位在1度之内。-430 based capture, can accurately measure the signal frequency, when the error in the low frequency 1hz, within 1 degree phase.
STC12_ADconvert
- STC12系列 AD转换输出，新芯片学习好资料。-STC12 Series AD conversion output, the new chip learning good information.
LED-PWM-control
- 用PWM功能控制LED的亮度，实现渐亮渐灭功能。-With PWM function to control LED brightness, realize getting brighter gradually eliminate functions.
XL232UP
- rs232 communication with 51
ADC
- DMAVR-M16的adc单通道转换示例程序，采取结束触发中断的方式 数据位数为10位精度，可以实现8位精度，显示结果为ADC输出的数字量-DMAVR-M16' s adc channel conversion sample program, a way to take the end of the interrupt data bits to 10-bit accuracy, can achieve 8-bit precision, display the results for t
AT24C02_IIC
- 使用C51单片机来进行读写AT24C02EEPROM程序-read and write the EEPROM of the AT24C02 for the C51
ADconvert_PCF8591
- AD转换 采用PCF8591芯片，经典例程-AD conversion using PCF8591 chip, classic routines
rtd270a-162-1119
- RTD2270 液晶驱动板 电路原理图 超级难得-RTD2270 LCD driver board schematic super rare