资源列表
liushuideng
- 延时程序、流水灯程序。在需要用到的时候，可以直接加入到大的程序段中-Delay procedures, water lights. The need to use, they can be added directly to a large block
MPU5060
- 通过IIC和MPU6050通讯（非硬件）-Communication via IIC and MPU6050 (non-hardware)
shumaguan
- 数码管按键显示程序 通过单片机实现 其中包括截图-Digital tube display program keys, including through the MCU Screenshot
stc89-watchdog-timer
- STC89系列单片机的看门狗应用，定时器定时中断里喂狗-STC89 Series MCU application watchdog timer timer interrupt in DOG
STM32_1DMA_rcvDEMO
- stm32DMA接收，基于奋斗的USART1的中断接收，做了下修改，在火牛的板子上，测试了下，可以接收，做用法调试用-stm32 usart1 dma rcv
yejing
- 12232液晶屏源程序，本程序为北京青云生产的12232液晶屏-yejing ping yuan cheng xu，keyitihuan beijing qingyun danpianji
89c51-virtual-serial-port
- 对于没有硬件的朋友们要以纯软件来仿真串口通信的解决方案，编译通过，可直接运行 -The solution for, no hardware friends to YISHION software to simulate serial communication through the compiler, can be directly run
ENC28J60-stm32-uip
- stm32 uip 实现 ENC28J60 spi-stm32 uip ENC28J60 spi
MPU6000
- 利用SPI总线读取MPU6000的值，传感器数据准备好后产生外部中断进而触发STM32去读取-The SPI bus read MPU6000 value, the sensor data is ready and then generate an external interrupt trigger STM32 to read
HMC5883L
- HMC5883L磁力计，用于测量三个轴的磁场，运用I2C总线通过外部输入中断触发去读取数据，并将结果通过串口传到上位机-HMC5883L magnetometer for measuring a three-axis magnetic field, the use of the I2C bus interrupt is triggered by an external input to read the data, and the results transmitted to the host
MPU6050
- 通过I2C总线读取MPU6050的传感器数据，并通过互补滤波算法解算出俯仰角和横滚角，最后将结果打印到上位机上-MPU6050 through the I2C bus to read the sensor data, and through complementary filtering algorithm solves for the pitch angle and roll angle, and finally print the results to the host computer
hal
- cc2430历程中的hal.h文件，有需要的可以下载-The CC2430 process in the hal.h file, there is a need to download