资源列表
time
- 通过P1.0端口以1HZ的频率输出信号，使用该信号点亮一个LED指示灯， 并将信号接入到INT1，统计中断的次数。 将中断的次数通过两个七段数码管采用十进制显示出来。当超过99次后，清零并 重新计数。-Through P1.0 port with 1 hz frequency output signal, using the signal light an LED light, And access to the signals to the INT1, statistical in
key
- 采用并行口实现数字0~9、A~F、L、U、P、n总共19个键盘 并将按键的结果用7段数码管显示出来。-Using parallel port Numbers 0 to 9, A ~ F, L, U, P, n A total of 19 keyboard And the key results with seven segment digital tube display.
PIC-C-language-development
- PIC单片机C语言开发，特别适合初学PIC单片机的人。-PIC C language development, especially for beginners who PIC microcontroller.
digal-source
- 利用单片机设计一个数控直流稳压电源，教程非常详细，有代码-NC using microcontroller design a DC power supply, tutorial is very detailed, with code
PC-(RS232-)
- 单片机串口通信的应用，通过串口，我们的个人电脑和单片机系统进行通信。 个人电脑作为上位机，向下位机单片机系统发送十六进制或者ASCLL码，单片机 系统接收后，用LED显示接收到的数据和向上位机发回原样数据。-Single-chip serial communication applications, through the serial port, our personal computers and SCM systems to communicate. PC as a PC, sen
CVBproteus
- C与VB语言联合在proteus上仿真，内含程序和代码，非常详细-C and VB language combined the proteus simulation, containing procedures and code, very detailed
IC
- IC卡读写仿真，内含程序和代码，有非常详细的仿真图解说明-IC card reader emulation, containing procedures and code, very detailed simulation illustrates
pc
- PC红外线遥控器上位机及电路图，有种代码和详细的电路图，图解说明，-PC IR remote PC and schematics, a kind of code and detailed circuit diagram, illustration,
LED-microcomputer
- 要求完成单片机、LED点阵显示屏及外围芯片的选型、单片机端口资源的分配以及LED点阵显示的控制系统，要求所设计的LED点阵显示屏可以显示数字、字符、中文汉字，并具有动态滚动的效果。-Required to complete the MCU, control system selection, allocation of port resources and LED dot matrix display LED dot matrix display and peripheral chips, LE
8253
- 这个是8253芯片的一个实例程序，对学习接口的人是有一定帮助的-this is the 8253 case of one procedures, to learn the interface are certainly helpful
DA
- 两个单片机之间实现串口通信，第一个程序是发送一个数给另一个并返回一个数，同时点亮数码管。第二个程序是一个单片机接受6个数，另一个单片机发送六个数。第三个是两个单片机互相发送6个数。等几个串口通信的单片机程序。-Serial communication between two microcontrollers, the first procedure is to send a number to another and return a number, but lit LED. The secon
DING
- 用c语言写的单片机时钟，数码管显示，第一个程序是没用定时器的时钟。第二个程序是定时器0的时钟。第三个是定时器2自动重装数字钟。还有可调时间的时钟， 可屏蔽一些按键的可调时钟等几单片机程序。 可屏蔽一些按键的可调时钟等几单片机程序。-Microcontroller using c language clock, digital display, the first program is useless timer clock. The second program is the Timer