资源列表
bujindianjiqudong
- PC机通过串口向单片机发送命令，单片机驱动步进电机工作在正转、反转、正转n圈后反转，反转n圈后再正转，启动、停止、转速设置等功能-PC through the serial port to send commands to the microcontroller, the microcontroller to drive a stepper motor in forward, reverse, forward n laps after reversal, reverse and then for
LCD1602
- LCD16002驱动程序，包括其头文件和底层函数-program of LCD1602
adv7171
- adv7171 初始化 C 语言程序,用于ARM和单片机-adv7171 initial
I2C_Driver
- IIC总线驱动C语言学程序，用于ARM和单片机-IIC driver
clock
- 利用单片机，实现了时钟的功能，并有3个按键，实现设置时间的功能-Simulation of a clock by 51
SPI-5616
- ARM控制5616实现SPI通信功能,完成ARM芯片读取写入数据。-5616 ARM SPI communication function control
4_3
- LED flow, digital display.-C file for learn.
430f2272-HTU21D
- MSP430F2272通过模拟IIC方式定时读取HTU21D温湿度采样值-MSP430F2272 regularly sampled values of temperature and humidity reading HTU21D IIC way through simulation
Timer1
- 定时器测试：利用定时器中断实现指示灯的闪烁。-Timer test: using the timer interrupt indicator light flashes.
Timer3
- 定时器测试：通过定时器改变小灯的亮灭状态。-Timer test: change the status of small bright lights off by a timer.
UART1
- cc2530 模块串口测试程序：向电脑循环发送HELLO-The CC2530 module serial port test program: to send HELLO computer recycling
UART2
- 串口测试：向串口发送数据，同时能接受上位机传回数据。-Serial port test: sending data to the serial port, and can accept the PC to send back data.