资源列表
UART
- STM32 串口实验.接线 ：直接接到串口STM32开发板串口-STM32 UART.
AT24C01
- 实现数据的存储和取出，比较存储和取出的数据，实现验证AT24C01的功能-The store and retrieve data, the extracted data and the comparison memory to achieve the function of authentication AT24C01
DS18B20
- 实现温度的检测，可随时监控温度，温度误差为0.01摄氏度-Temperature detection, can monitor the temperature, the temperature error of 0.01 degrees Celsius
LCD1602
- 利用LCD1602实现字符的显示，可以显示两行字符，每行16个字符-Characters use to achieve LCD1602 display, you can display two lines of characters, 16 characters per line
24c02
- 单片机定时器1用来产生0-100秒变化的秒表，并且显示在数码管上，每一秒都将此时的数据写入AT24c02中，当系统断电后，下次上电时从AT24c02中读取上次数据，并接着继续显示。注：此例程中AT24c02的A0A1A2引脚都是高电平。-SCM timer is used to generate a change in 0-100 seconds stopwatch, and displayed on the digital control, every second the data is w
pcf8563
- 实现电子数字钟的功能，可以正确显示时分秒功能，并且可以通过软件调节时间-Realization of electronic digital clock function, minutes and seconds functions can be displayed correctly and the time can be adjusted via software
LaunchPad
- 零死角玩转MSP430，入门教程，板上资源解读以及所用开发环境的入门-Zero dead Fun MSP430, Tutorial, resource interpretation board and a development environment used for entry
TLC549
- 实现A/D转换功能，将模拟电压通过数码管显示出来，从而实现数模转换-Achieve A/D conversion, the analog voltage through digital tube display, enabling digital to analog conversion
fengmingqi
- 蜂鸣器的检测，检测你开发板的蜂鸣器是否正常-Testing, test your development board Buzzer is normal
jiaotongdeng
- 实现交通灯的所有功能，包括红黄绿等的显示以及以及通行等功能-All functions of traffic lights, including red and yellow and green display and other features such as access
DS18B20
- 基于 STM32 的DS18B20温度采集程序，单线采集，硬件连接简单，需要上拉电阻-Based on the STM32 DS18B20 temperature acquisition procedures, in-line acquisition, the hardware connection is simple, requires a pull-up resistor
shuzishizhong
- 利用数码管实现数字时钟的时分秒显示功能，并且可以调节时和分。-When the use of digital control digital clock display minutes and seconds, and when you can adjust and points.