资源列表
lpc2219+d12+ucos
- 硬件构成：lpc2219+D13 软件功能：利用arm做主控，采用d13与usb接口做主机，通过主机向u盘中写入文件，当写文件完成后响铃提示-hardware : lpc2219 D13 software functions : the controlling arm, d8 using usb interface with the mainframe done by the mainframe to u sites writes the document, when the documen
Zlg_IPforlpc2200
- 在UCOS-II系统下一种简单易懂的TCP/IP协议,我在EASYARM2200上调试完全通过了,如果有问题也可以通过电邮联系我.-in UCOS-II system in a simple and easy to understand TCP / IP protocol. I EASYARM2200 debugging completely passed, if there are problems can also contact me through email.
uCOSII_44b0x_Keil
- 可以在ADS下跑的工程有很多,但在Keil下面的ucOS工程还没有.在这里,提供一个可以在Keil环境下跑起来的基于三星的44b0的ucOS工程,可以在RAM中调试.-ADS can run under the project are many, But in the following ucOS Keil works have not. Here, can provide an environment in Keil run up based on Samsung's 44 belts
proteus-ARM2100-uCOS2.70
- 没有ARM开发板如何搞开发,有了PROTEUS就可以搞定!快来学习PROTEUS哦! 此为proteus-ARM2100-USOS2.70仿真文件及原码,赶快下载学习哦!收益非浅啊!-not how ARM Development Board engaged in development projects With PROTEUS can get! Come learn PROTEUS Oh! this as proteus-AR M2100 - USOS2.70 simulation fi
ARM-uCOS-II.ZIP
- Micrium官方版ARM UCOS，支持ARM7和ARM9，开环环境IAR和GNU-Micrium official version UCOS ARM, ARM7 and ARM9 support. IAR open-loop environment and GNU
myZLG7290
- 运行调试smartarm,lpc2210上的按键
ucos_migration
- ucos操作系统在s3c2410开发板上的移植原码，平台是ads1.2.-OUT operating system in development board s3c2410 transplant original code is ads1.2 platform.
uCOS_IIv2.52_lpc2000
- uCOS-II v2.52 在lpc2000系列ARM上的移植源代码， 配合相应的工程模板使用,在ads1.2中调试通过-for uCOS-II v2.52 lpc2000 series of ARM in the transplant source code, works with the corresponding template used in the debug through ads1.2
8051ucos
- 8051单片机的ucos移植，里面的源代码已经过测试，没问题-8051 MCU OUT transplantation, which the source code has been tested, no problem
UcosUDP
- 基于ARM7TDMI处理器的UDP传输程序，建立在UCOS操作系统之上，可以向PC机传输数据。-based on the ARM7TDMI processor UDP transmission procedures, UCOS built on the operating system and can transfer to the PC data.
AVR_M16_ucos_II
- 1. OS版本为2.76 2. 使用Timer0的比较匹配中断为系统定时，频率为100Hz 3. 三种临界代码保护方式均可以使用，在OS_CPU.h里直接设置即可 如果安装了WinAVR20050214，则直接运行start.bat，输入make all即可开始编译。 如果需要在AVRStudio仿真，运行make extcoff后即可生成调试所需的cof文件。-1. OS Version 2.76 2. Timer0 use of matching interruptio
ucOSii_M128_ICCAVR
- 移植到M128上的ucOS-ii,可以用ICCAVR编译。-transplanted to the M128 ucOS-ii, ICCAVR compiler can be used.