资源列表
ucos-led
- 在UC/OS上运用C实现一个按键控制八个流水灯-In the UC/OS on the use of C 8 to achieve a key water control lights
UCOS-Q
- 在UC/OS-II上调用消息队列函数对消息队列进行编程-In the UC/OS-II on the function of call message queue message queue programming
OS_for_LPC21XX_LPC22XX_LPC23XX
- OS操作系统在LPC21XX,LPC22XX,LPC23XX上的实现源代码-OS operating system LPC21XX, LPC22XX, LPC23XX on the realization of the source code
uc_51_small
- uc/osII基于51单片机的时钟-uc / 51 osII based MCU clock-uc/osII based on 51 single-chip clock-uc/51 osII based MCU clock
smartarm2400
- smartarm2400开发平台配套例程 -development platform supporting routines smartarm2400 development platform supporting routines
uc-os2cx
- 嵌入式系统的一个UC-os2系统程序，这个可是我们学校高手老师的杰作，供大家参考-Embedded systems, a UC-os2 system program, the master teachers of our school but a masterpiece for your information
ucosii
- ucosii移植:μC/OS-II在S3C44BOX处理器上的移植 有代码-ucosii transplantation: μC/OS-II processor in the transplant S3C44BOX code
touch
- 基于ARM9-s3c2410的ucos-ii触摸屏使用源程序，使用之前需要正确配置了ADS1.2。否则无法编译通过，配置ADS1。2为ARM9的资料网上到处都是。-Based on the ARM9-s3c2410 touch screen ucos-ii the use of source code, the use of properly configured before the need ADS1.2. Otherwise it is impossible to compile thro
API
- 基于ARM9 S3C2410下ucos-II的基于lcd屏绘图API函数，需要正确设置ADS1.2下的配置否则无法编译通过，配置ADS1.2的文章网上有很多，参考下就可以了。-ARM9 S3C2410 based ucos-II under the lcd screen-based graphics API function, the need for the correct configuration settings of ADS1.2 otherwise it is impossible
can
- 基于ARM9 S3C2410下ucos-II的CAN总线驱动函数，需要正确设置ADS1.2下的配置否则无法编译通过，配置ADS1.2的文章网上有很多，参考下就可以了。-ARM9 S3C2410 based ucos-II under the CAN bus driver function, the need for the correct configuration settings of ADS1.2 otherwise it is impossible to compile through
RS-485
- 基于ARM9 S3C2410下ucos-II的RS485驱动函数，需要正确设置ADS1.2下的配置否则无法编译通过，配置ADS1.2的文章网上有很多，参考下就可以了。-ARM9 S3C2410 based ucos-II under the RS485 driver function, the need for the correct configuration settings of ADS1.2 otherwise it is impossible to compile through th
hc08gp32
- freescale GP32 UCOS 整个项目-freescale GP32 UCOS