资源列表
menu
- 一个基于uCOS-II的程序，控制芯片是以ARM7为内核的NXP公司LPC2290。其功能有：A/D转换程序，键盘输入程序、基于光棒的菜单程序，U盘驱动程序等。-A program for UCOS-II, the control chip as the core NXP ARM7 based company LPC2290. Its functions are: A/D conversion process, the keyboard input program, based on the l
LPC1788
- 一个基于Cortex-M3为内核，主控芯片为LPC1788的菜单程序，其特点为：只需要三个键：左移、右移、确定。-A program based on Cortex-M3 core, the master chip LPC1788 menu program, which is characterized by: the need for only three keys: left, right, OK.
EEPROM
- LPC中EEPROM的使用实例，经测试准确无误-Example LPC in EEPROM, tested the accuracy of
ADC
- LPC中ADC的使用实例，经测试准确无误-LPC use the ADC instances, tested the accuracy of
1plus1equal2
- r2=r1+r0=1+1=2 仿真然后察看r0,r1,r2寄存器-r2 = r1+r0 = 1+1 = 2 then the simulation view r0, r1, r2 register
LED-5S
- LED点亮5S，掉电，唤醒，流水灯,延时5S左右,按一下按键唤醒之后流水灯-LED lights 5S, power-down, wake, water lights
UCGUI3.90
- ucgui 3.90源代码， 可以再PC上运行，简单修改后可以很容易移植到自己的嵌入式系统-ucgui 3.90 source code can be run on a PC after a simple modification can be easily ported to own embedded systems
STM32-NRF24L01
- Simple test STM32f4 and NRF24L01
ucos-ucgui-sd-gps
- 在MiniSTM32开发板上使用串口1接收GPS信息，处理RMC和GSV语句，在液晶屏上显示当前定位信息，并且移植了Fatfs文件系统，在SD卡下保存当前的定位信息。-MiniSTM32 development board serial port using a GPS receiver information processing RMC and GSV statement shows the current location information on the LCD screen, an
Exp10-System-migration
- 每个微处理器的字长都是不一样的，本程序实现μCOSII操作系统在S3C2410处理器上的移植-Each processor word size is not the same, the program realization of μ COSII operating system in the S3C2410 processor transplant
dzccx
- 单片机显示屏显示程序 它可以进行初始化显示，可以用来检测显示屏的好坏-SCM display program that can be initialized display
Telnet
- STM32开发例程,ucos移植，GUI移植。-STM32 development routines