资源列表
MotorControl
- TM4的下的电机控制程序，开发环境为CCS或者Keil。-A motor control program for TM4,the development environment is CCS or Keil.
ucoscan
- 采用UCOS操作系统实现在界面上操作发送按钮实现CANH端一定和CANH端的通信（CAN总线通信）-UCOS operating system implementation using the Send button operation to achieve certain ends and CANH CANH terminating communication (CAN bus communication) at the interface
LEDPUCOS_2.90
- ucos2.9源码,包含各个模块，编译通过，有需要的，拿去用-ucos2.9 source code
RTX51-Tiny
- RTX51 Tiny是一种实时操作系统（RTOS），可以用它来建立多个任务（函数）同时执行的应用。嵌入式应用系统经常有这种需求。RTOS可以提供调度、维护、同步等功能。 实时操作系统能灵活的调度系统资源，像CPU和存储器，并且提供任务间的通信。-RTX51 Tiny is a real-time operating system (RTOS), you can use it to create multiple tasks (function) while application executi
xep100-trans-ucos
- 成功移植ucosii到飞思卡尔XEP100上-transfer the RTOS ucosii to freescale xep1100
MicrOS_LSPD_SpdGover_V2.1
- 在CW4.7开发环境下移植UCOS-II到飞思卡尔XEP100单片机上。本程序带canape的ccp驱动，能够实现标定功能。有个小问题：主程序处理中断会导致ucos卡死，有懂得可以帮忙解决一下。只是用的话，本程序没有问题，中断全部交给xgate即可。-Transfer the RTOS to freescale xep100. The CCP driver for Canape is included, and can be used to calibtate. There a question
ucosiii-ADC
- uCOSiii系统STM32的ADC采样例程，ADC采样值通过串口发送的上位机，同时增加了LED的任务。-uCOSiii system STM32 ADC sample routines, ADC samples sent by the host computer via the serial port, while increasing the LED task.
uC_UDP_IAP_test2
- LPC1768在UCOSII平台进行网口与串口路由转发，已经测试通过并投入生产-LPC1768 platform in UCOSII network port and serial routing and forwarding, has been tested and put into production
uCOS-II
- STM32F103系列UCOS 2.86源码-STM32F103 series UCOS 2.86 Source
i80296
- ucosii 在80c296上的移植 tsking c 编译软件-Ucosii for 80c296 tasking c
clock_electronic
- 嵌入式之初步学习（电子时钟）代码,时钟界面学习-Preliminary study of embedded (electronic clock) Code
Ordering-device
- 嵌入式之初步学习（点菜器）代码，学习此类代码编程-Preliminary study of embedded (à la carte device) code, such code programming learning