资源列表
OpenCVtoDSP
- 将OpenCV移植到DSP上，源程序可用CCS直接打开，包括函数说明等-OpenCV transplanted to the DSP, CCS can be used directly to open source, including function descr iption, etc.
dsp
- 三相电各参数分析及计算，检查是否符合国标。并有DSP相关的EMIF及MCBSP等部分代码。-Analysis and calculation of parameters of three-phase power, check for compliance with the national standard. And DSP related EMIF and MCBSP, part of the code.
ADSP-ADvancedSignalProcessing-
- 数字信号处理的目的是对真实世界的连续模拟信号进行测量或滤波。因此在进行数字信号处理之前需要将信号从模拟域转换到数字域，这通常通过模数转换器实现。而数字信号处理的输出经常也要变换到模拟域，这是通过数模转换器实现的。 -ADSP ADvancedSignalProcessing
PI_metal_100803_v1_ok
- ccsc compiler metal detector project
emifa
- TMS320C6455emifa驱动例子，经测试可用 -TMS320C6455emifa-driven example, can be tested
TEST
- 代码用于测试dsp2812的硬件功能，硬件和FPGA通讯，共同完成任务-Dsp2812 code for testing the hardware functions, hardware and FPGA communication, a common task
DSPIC30
- PIC30系列经过调试的C代码，非常实用，-PIC30 Series After debugging the C code
TMS320F28335DSP
- TMS320F28335程序,关于TMS320F28335DSP的一些例程-TMS320F28335 procedures, a number of routines on TMS320F28335DSP
IIR
- 这是DSP实现的无线冲击（IIR）滤波器的实现，用C语言编写，已调试通过 -This is a DSP-wireless impact (IIR) filter to achieve, using C language, has been debugging through
OFDM_ti6701
- 使用ti公司的6701板完成的ofdm系统，同时具有MATLAB代码和英文说明。 -ofdm sender 1. start code composer studio 2. open .\OFDMsender\sender.pjt you may need to change the paths to the librarys and include directory 3. build ofdm receiver 1. start
DSP-Applications-Using-C-and-the-TMS320C6x-DSK_AN
- 《DSP Applications Using C and the TMS320C6x DSK》book and Codes
Emu_SDRAM_TEST
- TI C6416 SDRAM测试程序，本人亲自编写，并在做好的板子上测试成功，绝对实用的程序-TI C6416 SDRAM test program, I personally prepared, and do a good job board on the test is successful, the absolute utility of the program