资源列表
UART_RS-232_HyperTerminal_session
- BF533的串口例程，包括将串口作为设备的初始化，及对设备的操作-BF533 serial routines, including the serial port as a device initialization, and on the equipment
STDIO_UART
- 在BF533上用汇编实现的串口初始化程序-BF533 used in the compilation of the realization of the serial port initialization process
fft
- FFT应用库安装软件,DSP平台，C2000仿真软件运行。-FFT library to install the software applications, DSP platform, C2000 simulation software running.
RTC
- 该程序为DSP2812开发板上时钟芯片的源码，采用IIC总线设计-The program for the development of on-board DSP2812 chip clock source, the IIC bus design
DA
- DSP2407系统板上的DA转换器件代码，通过软件设置信号输出设置波形-DSP2407 system board of DA conversion device code, through software settings set signal output waveform
sram
- 2407外扩SRAM的读写程序，通过对相应单元进行读写测试器件-2407 outside the extended SRAM process of reading and writing, through reading and writing the corresponding unit test device
can
- 该程序为DSP2407的外设模块CAN模块的自测试程序-DSP2407 the program for the peripheral module CAN module self-test procedures
SEED-DPS2812-USB
- TI公司DSP2812外扩USB接口的测试程序-TI company expanded outside the USB interface DSP2812 test procedures
DSP2812CPUTIMERtest
- 使用TI公司的TMS320F2812DSP，在CCS下编译，通过设置DSP的通用定时器的中断来测试CPU的主频，通过LCD显示。-The use of TI s TMS320F2812DSP, under the CCS compiler, by setting a common DSP timer interrupt to test the CPU s frequency, through the LCD display.
DSP2812GPIOtest
- 使用了TI的2812型DSP，在CCS下编译，用与测试DSP的GPIO口的输入输出功能，通过 LED的闪烁来加以相应。-The 2812 uses the TI-based DSP, under the CCS compiler, use and testing of DSP s GPIO port input and output functions, through the blinking LED to be appropriate.
DSP2812PWMtest
- 使用TI的2812DSP，在CCS下编译，用于测试2812特有的事件管理器的PWM波形输出，通过示波器可以看到PWM脉宽的变化响应。-The use of TI s 2812DSP, under the CCS compiler, 2812 for testing specific incident Manager PWM waveform output, through the oscilloscope can see changes in response to PWM pulse widt
guoling
- 现代数字信号处理的期末作业，一种关于过零算法的研究-Modern digital signal processing at the end of operation, a kind of on the zero-crossing algorithm