资源列表
ccs_cmd
- cmd 文件用于DSP 代码的定位。由于DSP 的编译器的编译结果是未定位的， DSP没有操作系统来定位执行代码，每个客户设计的DSP 系统的配置也不尽相同，因此需要用 户自己定义代码的安装位置。安装位置是指，编译完成的代码是存放在dsp的那个位置，程序空间RAM或者数据空间RAM，起始地址以及长度。-cmd file for the positioning of DSP code. As the DSP of the compiler to compile the result
dsp
- 一些dsp实验程序，希望对大家有用处，以后又更多东西上传-Dsp some experimental procedures, useful for all of us hope that, after more upload things. . .
dspITUG.729
- 定点dsp实现itu729的介绍，很好的讲解了其dsp的涉及-The realization of fixed-point dsp introduction itu729, very good on its dsp involving
fft2xx
- dsp中的很重要的fft变换的c语言实现，对于理解dsp开发很有用-dsp very important in the fft transform c language for understanding the development of useful dsp
SPALIB
- dsp常用程序，里面有常用的一些算法，提高开发效率，避免重复劳动。-dsp basic program
2812
- 这是一款调试过的2812can接口接收软件程序！-This is a debugging interface 2812can before receiving the software program!
sdram_mt48
- 带DSP/bios的sdram驱动程序，64bit*32M，TI c6416平台，仿照开发板连接-With DSP/bios of sdram driver, 64bit* 32M, TI c6416 platform, modeled on the development of plate connections
flash
- TI C6416平台，用DSP/BIOS, NOR FLASH驱动程序，2M*8bit, 仿照开发板连接-TI C6416 platform, the DSP/BIOS, NOR FLASH driver, 2M* 8bit, modeled on the development of plate connections
test
- 本程序是应用于DSP TMS320VC5416芯片的FLASH读写程序，使用本程序可以对NOR型FLASH进行编程、擦除操作-This procedure is applied to the FLASH chip DSP TMS320VC5416 to read and write, the use of this procedure can be carried out on the NOR-based FLASH program, erase operation
main
- 本程序是应用于DSP TMS320VC5416芯片的EEPROM读写程序，使用本程序可以对EEPROM进行编程、擦除操作-This procedure is applied to the DSP TMS320VC5416 chip EEPROM read and write, the use of this procedure can be programmed to the EEPROM, erase operation
test
- 本程序是应用于DSP TMS320VC5416芯片的使用FLASH进行自动引导程序，使用本程序可以对DSP进行自动引导程序-This procedure is applied to the use of DSP TMS320VC5416 chip FLASH automatically guide the procedures, the use of this procedure can be carried out automatically on the DSP boot
IP501_h263_loopback
- DM642平台，采集图像，经过H263压缩算法编、解码，然后再回放-DM642 platform for image acquisition, the H263 compression algorithm for decoding, then playback