资源列表
Microchip_C30_Source_Code_4
- Microchip C30 source code continued
Microchip_C30_Source_Code_5
- Microchip C30 Souce code continued
Microchip_C30_Source_Code_6
- Microchip C30 source code continued
DSP2812timer2
- 实验结果:每次定时时间到，二极管将进行全亮或则全灭一次 -Experiment descr iption: this experiment the basic configuration and CPUTimer0 essentially the same, only difference is that the use of non**** peripheral interrupt expansion of PIE interrupted, it can be launched directl
EX03_EvTimer
- 实验说明:这里我们只使用了EvaTimer1来控制LED灯的亮灭,你在学习中 ** ** 可通过它来了解EV的定时器工作原理,对以后做电机之类的控 ** ** 制时可以引用部分函数 ** ** 实验结果:可看到板上8个发光二极管产生流水灯的效果-Experiment Descr iption: Here we have only used the EvaTimer1 to control the bright LED lights eliminate, in your learn
EX04_SPI_LED
- 实验说明:QQ2812通过SPI接口控制LED数码管 实验结果:可看到数码管从0～F循环显示-Experiment descr iption: QQ2812 through the SPI interface to control LED digital tube results: you can see the digital control loop shown from 0 ~ F
EX05_BUZZER
- 实验说明:通过DSP往CPLD里面送数据,然后由CPLD的IO口来控制,具体可 ** ** 查看硬件电路及CPLD代码 ** ** 实验结果:加载运行程序可听到蜂鸣器嘀..嘀..的叫声-Experiment descr iption: The DSP inside the CPLD to send data, and then by the CPLD' s IO port to control the specific hardware circuit can be**** Vie
EX06_ExRam
- 实验说明:能够为以后写比较大的程序时，在仿真运行时内部RAM不够用 ** ** 时，可利用外部RAM来进行，当然这需要.CMD文件来配置 ** ** 实验结果:在指定位置设置断点后可观察通过函数来写到地址里面的值 -Experiment Descr iption: able to write after the larger program, the simulation run time**** with the internal RAM is not enough, the exte
EX07_EXFlash
- 实验说明:外部RAM实验联合进行的,先是给外部 RAM里面写写入数据,然后把数据写到外部FLASH里面 实验结果:在指定位置设置断点后可观察通过函数来写到FLASH里面的值-Experiment descr iption: external RAM experiment carried out jointly, first write to external RAM which to write data and then writes the data inside the experimen
BOOT
- DM642大小文件烧写程序完整版，包括文件格式转换以及FBTC642源代码-DM642 size of the file Shaoxie program full version, including file format conversion, and FBTC642 source code 81404601boot
dspandmatlab
- DSP程序开发MATLAB调试及直接目标代码生成-DSP program development and direct target MATLAB debugging code generation
dspc
- DSP C语言基础要点详细说明了，利用DSP c2000编程中的c/c++要点，值得一看-DSP C language-based elements described in detail the use of DSP c2000 programming c/c++ points