资源列表
8.2self
- DSP 2812 rs232 实例程序 已经调试通过-Dsp 2812 rs232 instance, the application has been through
10.4pwm
- DSP 2812 pwm实例程序 已经调试通过-Dsp 2812 pwm instance, the application has been through
10.2timer
- DSP 2812 timer 实例程序 已经调试成功-DSP 2812 timer instance of the program has been debugged
10.5txpwm
- DSP 2812 txpwm实例程序 已经调试成功-DSP 2812 txpwm example programs have been debugged
2808plus
- 基于2808的带有按键显示的不同频率脉冲发生，以及输入输出信号，以及电机转速检测的代码-Based on 2808' s with the button to display the different frequency pulse, and the input and output signals, and motor speed detection code
IIRlbq
- 详细的MATLAB 设计参考，不错的参考资料 -very good
matlab_iir
- 用MATLAB辅助设计IIR数字滤波器.pdf 非常详细，值得参考-good！！！！！
DSP2812-ad
- 2812的片内AD转换功能，12位分辨率，16通道采样。-2812 chip AD conversion, 12 bit resolution, 16-channel sampling.
DSP2812-CpuTimer0
- DSP内部定时器0的使用，通过使用DSP内部的定时器0来实现对LED灯的控制。-The use of DSP internal timer 0, by using the internal DSP timer 0 to achieve control of LED lights.
DSP2812-Ext_int
- 2812有三个独立的外部可屏蔽中断XINT1,XINT2,XINT13和一个不可屏蔽中断XNMI，外部扩展可屏蔽中断通过CPLD之后，通过按键产生一外部中断EXINT5。-2812 has three independent external maskable interrupt XINT1, XINT2, XINT13 and a non-maskable interrupt XNMI, external expansion through the CPLD can be screened a
DSP2812-485
- 了解485通信在DSP中的应用，运行此程序后，然后打开串口调试工具，发送一字节，通过串口线和适配器后，DSP收到一字节，然后在转发回去给PC。-About 485 in the DSP application, run this program, then open the serial port debugging tool, send a byte through the serial cable and adapter, DSP receive a byte, and then trans
DSP2812-SPI_LED
- 掌握DSP的SPI工作原理，通过SPI接口控制LED数码管，使数码管从0～F循环显示。-DSP' s SPI master works, through SPI interface control LED digital tube, so that the digital control loop from 0 ~ F display.