资源列表
KahnProcessNetwork
- Java模拟嵌入式KahnProcessNetwork工作原理，交替输出0和1。-Java Embedded KahnProcessNetwork simulation works, alternately outputs 0 and 1.
UCOSII-51-V2
- 这是51单片机程序，程序采用STC12C5A60S2芯片开发，程序移植了简化版UCOSII系统，在小芯片上可以流畅的运行。-This is a 51 microcontroller program, the program uses STC12C5A60S2 chip development, porting a simplified version UCOSII system that can run smoothly on a small chip.
ChangAn
- 51单片机程序，简单的长按短按程序，程序代码附有解释。-51 microcontroller program, simply long press short press, program code with explanation.
gas
- 51单片机程序，OLED显示，STC12C5A60S2芯片控制，通过开启芯片颞部四路ADC采集电压，采集模块为气体检测模块。-51 microcontroller program, OLED display, STC12C5A60S2 chip control, by turning the chip temporal Quad ADC acquisition voltage acquisition module for gas detection module.
STM32-GS1011-setup-WIFI
- 利用stm32来配置wifi芯片，最终建立wifi热点。-Use STM32 to configure the WiFi chip GS1011, we set up WiFi
can_bootloader
- STM32F103的CAN总线Bootloader源代码。-The source code of CAN bus bootloader for STM32F103.
project
- 本工程面向stm32f10xxE系列芯片，包含基本的串口、中断、LCD显示及湿度传感器（hs1101）处理程序.-The project for stm32f10xxE series chip, contains the basic serial port, interrupt, LCD display and humidity sensor (hs1101) handler.
Functions
- My function in first python programming
STM32_SPWM_Adjustable
- 1、ADC用于DMA模式，TIM3的TRGO触发，ADC等时间采样 2、TIM2的1、2通道用于捕获 3、TIM1的第一路，用于SPWM，使用的是对称规则采样法，此方法计算量较小-1, ADC for DMA mode, TRGO TIM3 trigger, ADC and other time sampling 2, TIM2 1,2 channel for capturing 3, the first road TIM1 for SPWM, using a symmetric
STMT32_TIM3_CH1234
- 基于stm32rzet6的pwm波产生模块，TIMER3产生4路pwm波-Pwm wave generation module based stm32rzet6 of, TIMER3 produce 4 pwm wave
digital-clock
- 采用51单片机定时中断方式（T1方式2）设计，电子钟，显11-58-48秒，8位数码管。用汇编编写，带有仿真电路图-51 microcontroller using timer interrupt mode (T1 mode 2) design, electronic bell, which was 11-58-48 seconds, eight digital tube. Written in assembly with circuit simulation
slar091
- MSP-EXP430FR5969 Hardware Design Files