资源列表
ARF2498
- 2.4G 无线模块 ARF2498 驱动源代码，基于STM32F103编写-2.4G wireless module ARF2498 driver source code, based on the preparation of STM32F103
robot-odyssey-ds
- Partial port of Robot Odyssey game for DOS to the Nintendo DS, using static binary translation.
clavier
- decoding matrix keyboard 4x4 with mikroC
STC15EEPROM
- STC15单片机内部EEPROM读写方法实例-STC15 MCU internal EEPROM write method of Example
GY-51
- GY-51测试程序，已经调好，没有错误，滤波程序要自己写-GY-51 test program has been fine, no errors, filtering program to write their own
LEADIY-M3-TB
- 功能最全面的惯导模块，支持异步串口通讯和IIC，此文件为LEADIY-M3 TB测试程序-Most comprehensive inertial navigation module to support asynchronous serial communications and IIC, this file is LEADIY-M3 TB testing procedures
STM32ENCODE
- 此例为正交编码器的程序，可以修改精度，用的是STM32的专用编码器接口-This example is a quadrature encoder, you can modify the accuracy, using STM32 dedicated encoder interface
DAOLIBAI
- 旋转倒立摆程序，双环pid控制参数因摆的物理特性不一致就只能自己挑了，此例只是框架-Rotating pendulum program, bicyclic pid control parameters are inconsistent because of the physical properties of pendulum can only pick their own, and in this case only the frame
EXAMPLE
- 此例为STM32F103ZET6的模板，用的时候直接在上面写，就不用再新建工程了。-This example is STM32F103ZET6 template, when used in direct write, there is no longer a new construction.
GEopccode3
- OPC服务器源代码，可以运行和自注册，并可通过标准OPC客户程序读写数据-OPC server source code GE. Can run and self registration, accessible through standard OPC client program to read and write data.
load2
- 人行横道智能控制交通灯源程序加proteus仿真图，自己编写，并且仿真通过-Crosswalk intelligent control of traffic light source program and proteus simulation diagram, write their own, and simulation through
PWM-output
- 基于STM32CortexM3内核PWM波形输出，通过修改程序的时间参数，可以得到不同占空比的波形，如50 ，75 ，100 。-Based on kernel STM32CortexM3 PWM waveform output, by changing the time parameters of the program, can get different duty cycle of the waveform, such as 50 , 75 , 100 .