资源列表
RTC-timer
- 基于stm32f103的RTC实时时钟，功能有：采用oled液晶屏显示时间和日期，可通过按键或者红外遥控来控制修改时间，加温度显示等。(RTC real-time clock based on STM32F103 has the following functions: using OLED LCD screen to display time and date, controlling modification time by keys or infrared remote control,
IC卡坐灸
- 带射频卡读取，数码管显示，按钮采集，温度采集，PID控温。(Read with RF card, PID temperature control)
MSP430F5529LP_launchpad例程
- MSP430F5529LP_launchpad例程，msp430是一款提供商的例程
RTC万年历
- stm32F103RCT6做的万年历，原理图程序都有(The calendar made by stm32F103RCT6 has schematic programs.)
SD卡
- 完成S3C2440中的SD卡的裸机驱动，初始化S3C2440 SD卡控制器，能够完成SD卡的识别、分类、读写等操作(Complete the bare driver of SD card in S3C2440, initialize the controller of S3C2440 SD card, and complete the identification, classification, reading and writing of SD card.)
Ultrasonic ranging car collision avoidance
- 通过超声波测距控制汽车电机速度避免碰撞，内含程序源文件及Proteus仿真文件。(Through ultrasonic ranging control vehicle motor speed to avoid collision, including program source files and Proteus simulation files.)
19264的KS0108
- 基于19264的KS0108的stm32的硬件编程(Hardware Programming of STM32 Based on KS0108 19264)
spi_ad8285
- 利用FPGA驱动AD8285进行寄存器配置(Drive AD8285 for configuration)
SHT30
- 读取SHT30模块中温湿度数据，并发送至OLED显示(Read the temperature and humidity data in the SHT30 module and send it to the OLED display.)
3.Open source Letter Shell
- 基于STM32WB55的shell命令行范例(Shell command-line example based on STM32WB55)
STM32F106CT稳压电源
- 完全调试成功，自带校准功能。精度可以到小数位后三位。(Complete debugging is successful, with calibration function.)
input_control
- 树莓派3b+，通过vnc远程登录后，通过控制台input发送命令控制树莓派程序(Raspberry dispatch 3b +, after remote login through vnc, send commands through console input to control raspberry dispatch program)