资源列表
0505
- 智能取暖气，有童锁，自动定时待机，记忆设定温度，超温报警并自动关闭加热输出，可调温范围：20至65摄氏度，测温范围-50至120摄氏度，可显示-19至99摄氏度！-Smart take Heating, have child lock, automatic timed standby, memory set temperature, over-temperature alarm and automatically shut down the heating output, thermostat
Stm32_template_CAPTURE
- 利用STM32F103引脚捕获测量频率 利用STM32F103引脚捕获测量周期-Using STM32F103 to measure frequency
PWM-TEST
- dsPIC33FJ16GS504单片机测试程序，需要用MPLAB IDE 打开。6路PWM的测试程序，6路PWM的初始化设置。-PWM test
ET7208_ET6290
- mega16控制ET7208和ET6290实现LED等随音乐呼吸的效果，用winavr开发。-mega16 control ET7208 and ET6290 with the music of LED and other respiratory effects, with winavr development.
AD5421驱动
- 本程序由C语言编写，单片机采用MSP430F2132对AD5421进行读写操作
pt100热电偶查表
- 热电偶查表法，由C语言编写，可查温度范围-200~850度
STM8_LCD_HT1621
- STM8与HT1621通讯实例，已调试通过，部分信号引脚请根据实质情况调整。-STM8 with HT1621 communication as an example, has been debugging through, part of the signal pin please adjust according to the real situation.
lwip1.4.0-stm32f107
- lwip 1.4.0在STM32F107上的移植笔记-lwip 1.4.0 on the STM32F107 transplantation notes
project
- 优秀本科毕业设计，太阳能交通灯控制器的设计的全部代码-Outstanding graduate design, solar traffic light controller design all the code
AD7793
- AD7793的配置，主要用于PT100上-AD7793 configuration
ADPUART
- 热敏打印机~~单片机控制c语言完整版 长把时间都花费在为您修正说明上。压缩包解- Thermal Transfer Printer ~ ~ SCM c language full version
Disinfection-clean-screen-program
- 医院里空气净化器主芯片的主程序，主要芯片有STC89C54RD+，DS1302，ULN2003。-Hospital air purifier main chip of the main program, the main chip has STC89C54RD+, DS1302, ULN2003.