资源列表
test
- stm32库开发模板，是keil5编译器(The stm32 library development template is the keil5 compiler)
SteppingMotor_PWM
- STM32F103为核心控制步进电机实现S曲线加减速(STM32F103 is the core control step motor to realize S curve plus deceleration)
IAP-Uart_hid
- stm32f103 串口IAp,上位机通过C#实现(STM32F103 serial port IAp, the upper computer is realized by C#)
allnew_160160_uc1698
- uc1698驱动程序， 51单片机编写 ，并口和spi接口都有 ，常规字符显示都有(Uc1698 driver hhhhhhhhhhhhhhh)
01.LCD液晶595驱动包
- 两片74hc595实现对LCD12864的驱动及keil程序(Two pieces of 74HC595 to implement LCD12864 driver and keil program)
LTC6803
- 实现多节电池电压、温度信息的采集功能，包括6803的初始化，SPI通信以及读取电压等模块程序(Realizing the collection function of the battery voltage and temperature)
Stm32建立工程库
- stm32建立工程。嵌入式的单片机开发，C语言的进一步学习。能够对嵌入式学习入门工程的建立开好头。(STM32 set up a project. Embedded MCU development, C language further learning. It can make a good start to the introduction of embedded learning engineering.)
改485
- 信捷PLC与变频器进行485通讯，可以采用modbus协议通讯(Xinje PLC and frequency converter are 485 communications, can use Modbus protocol communication)
三色LED程序PCA
- 利用STC15单片机的PCA功能实现PWM的调节，从而控制三色LED的调光功能。(The PCA function of STC15 microcontroller is used to realize the adjustment of PWM, so as to control the dimming function of the three color LED.)
STM32F0 HAL CDC
- 基于HAL库的STM32F072 USB通信程序。将USB枚举为CDC方式，使用虚拟串口与PC进行通信，可以达到发送和接收500+KB/s的传输速度。并在自建eval文件中实现I2C通信。可根据自己需要将main.C进行修改。(STM32F072 USB communication program based on HAL library.The USB enumeration is the CDC way, and the virtual serial port is used to comm
TFTLCD+ESP8266
- stm32使用esp8266发送数据 可以显示在lcd屏幕中(STM32 using esp8266 to send data can be displayed on the LCD screen)
0.95寸 OLED屏
- STM32F103 0.95寸OLED程序代码(STM32F103 0.95inchOLEDdrive)